| Lighting Systems |
Page of 8 | 2 Light T5 HO Direct/Indirect |
Wiring Options: 2 Circuit Left/Right Switching
2 Circuit Left/Right Switching
Type 2: 2cct.
Type 9: 2cct. w/1cct. thru wire
Type I: 2cct. w/2cct. thru wire
Fixture wired for two circuit. Lamps wired for left/right switching.
2 Circuit Left/Right Switching with Emergency Circuit/Night Light (EC/NL)
Type 4: 2cct. w/EC/NL
%#., | ||
%#., |
One 4’ section in two circuit fixture (left/right switching) to be wired on a separate thru circuit. Leads for both normal circuit and EC/NL circuit wired to fixture ends. All lamps in EC/NL section to be wired together.
2 Circuit Left/Right Switching with Emergency Battery Pack (EM)
Type 6: Chloride standard CTP700
Type N: Bodine standard LP550
Type F: Chloride high performance CTP1300
Type Q: Bodine high performance LP600
%- |
Fixture wired for two circuits (left/right switching), plus a battery pack is wired to one lamp. A hot lead is connected to the battery pack and would act as a ‘trigger’ wire when connected to a constant hot by installer. Leads for both normal circuit and battery pack are wired to fixture ends.
*Note:
2 Circuit Left/Right Switching with Emergency Circuit/Night Light and Emergency Battery Pack
Type K: Chloride standard CTP700
%#., %- | ||
%#., |
One 4’ section in a two circuit fixture (left/right switching) to be wired on a separate thru circuit, in addition, a battery pack is wired to one lamp. Installer can connect ‘trigger’ wire to EC hot lead if controlled together or wired separately if controlled independently. Leads for both normal circuit, EC/NL and battery pack are wired to fixture ends. All lamps in EC/NL section to be wired together.
*Note:
Job Information | Type: |
Lightolier a Genlyte Company | www.lightolier.com |
631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • 0205 Rev.1
