![Lighting Systems F7000-19](/images/new-backgrounds/41340/413401x1.webp)
Lighting Systems F7000-19
1BHFPG
6
'4FSJFT-JHIU54PMJE
Armstrong®5FDI;POFÜ$PNQBUJCMF
6.75” (17.15cm)
4
5
1.63” (4.14cm)
1
F7 |
|
| 5 |
|
|
5 = Curved
Complete Ordering Instructions below.
1
1 = Solid
1
1 = 1 Lamp
| Color |
| Wattage | ||
|
|
|
|
| |
|
|
|
|
|
|
| AL = Aluminum |
| 1 = 28W | ||
| WH = White |
| 2 | = 54W | |
|
|
|
| 4 | = 28W EM |
|
|
|
| 6 | = 54W EM |
1 = 120v
2 = 277v
| Length | Options | ||
|
|
|
|
|
|
|
|
|
|
| 4 = 4’ (121.92cm) |
| X4 = 4 Through | |
| 8 = 8’ (243.84cm) |
| Wires | |
|
|
|
| X5 = 5 Through |
|
|
|
| Wires |
1.Housing: Single piece of high purity extruded aluminum, a portion from recycled material.
2.Housing End:
3.End Cap:
4.Lamps: F28T5 or F54T5HO as specified. By others. Installed from the ceiling side of the luminaire.
5.Ballast: Electronic. Meets ANSI starting,
6.Reflector:
Connections:
Emergency Battery Pack: 90 minute operation, 700 lumens for 54W and 520 lumens for 28W.
Power Feeds: Standard 18/3 power feed is rated for 10 amps. X4 power feed is 18/4 and is rated for 7 amps. Observe amperage limitations and provide addi- tional Intermediate Power Cables, as required. When providing an additional power feed, the through wiring from the previous module must be disconnected from the cannon plug and capped.
Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off.
MountingCable suspension is on 48” (121.92cm) and 96” (243.94cm) centers and consists of
a4 1/2” (11.43cm) diameter canopy finished white enamel and a 1/16” (0.16cm) diameter stainless steel aircraft cable adjustable up to 36” (91.44cm).
UL, cUL and I.B.E.W.
Ordering InstructionsIndividual Fixtures:1.Order one MODULE.
2.Order one POWER FEED END SET.
Continuous Rows:1.Order the appropriate number of MODULES for the complete run.
2.Order one POWER FEED END SET.
3.Order one INTERMEDIATE CABLE SET per MODULE minus one.
4.For runs that exceed amperage limits, order the appropriate number of CABLE/CORD SETs.
Job Information | Type: |
Job Name:
Cat. No.:
Lamp(s):
Notes:
"JSQPSU3PBE'BMM3JWFS."t t'BY
We reserve the right to change details of design, materials and finish.
XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt &