Lightolier GV4WB432 Page 2 of, SURFACE FLUORESCENT 4 LAMP, T8 OR T12, Ordering Information, Type

Section 6A/Folio P20-62

														GUARDSMAN				GV4WB432
Page 2 of 2										VANDAL RESISTANT WRAPAROUND, 15-5/16" WIDE, 4' LENGTH
														SURFACE FLUORESCENT 4 LAMP, T8 OR T12
	MODEL NO. GV4WB432120O4										LER = FW - 76			IW - 108	BF - 0.91
											Comparative yearly lighting energy cost per 1000 lumens = $3.16
	coefficient of utilization										typical V.C.P.’s					candlepower
	pfc	20									Room	Mounting Height				angle	end	45	cross
	pcc	80			70			50			Size	Lengthwise Crosswise				0	3116	3116	3116
	pw	70	50	30	70	50	30	50	30			8.5	10	8.5	10	5	3123	3119	3107
	RCR										30x30	51	54	47	52	15	3020	3063	3099
	0	92	92	92	89	89	89	83	83		40x40	49	51	42	46	25	2814	2941	3020
	1	83	81	77	81	78	75	73	71		60x30	53	56	51	55	35	2506	2716	2830
	2	77	70	66	75	68	64	65	61		60x60	46	48	37	41	45	2040	2285	2285
	3	70	63	56	68	60	56	57	53		100x100	45	45	33	36
																55	1178	1348	1257
	4	65	56	48	63	55	47	52	46
																65	632	695	862
	5	59	50	42	57	48	42	46	40
																75	348	395	553
	6	55	45	39	53	44	38	41	36
																85	95	229	372
	7	51	40	34	50	40	34	39	33
																95	0	156	306
	8	47	38	30	46	36	30	34	29
	9	45	34	28	42	34	28	32	27							105	3	163	237
	10	41	32	26	40	30	25	29	25							115	6	119	162
																125	10	87	117
																135	15	65	91
																145	13	48	65
																155	13	31	46
																165	11	17	25
																175	11	11	14

ORDERING INFORMATION

Explanation of Catalog Number. Example: GV4WB432120O4GLR

GV WB

4

FIXTURE	LAMP		VOLTAGE:			OPTIONS:
LENGTH:	QUANTITY		120 or 277			Add appropriate
4=4 Foot						suffix to catalog
8=8 Foot	FIXTURE	LAMP TYPE/		BALLAST TYPE:		no, ie: (GLR)
VANDAL
RESISTANT	TYPE:	FIXTURE LENGTH:	2-2	Lamp Mag. T12	LE
SURFACE	WB=Wraparound	32=T8			20THD	10THD
LUMINAIRE	15-5/16" wide	34=T12	2-2	Lamp Elec. T8	SO*	HI*
		(nominal 48"	1-4	Lamp Elec. T8	O4*	H4*
		or 96")

*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

SCREWDRIVER: For holt head screw. Order Catalog Number LP156737. ELECTRICAL/WIRING OPTIONS Consult factory

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

SPECIFICATIONS

PERFORMANCE: In an installation of 4 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .81. To reduce glare the VCP shall be not less than 37 either cross- wise or lengthwise (at 100fc level) and the average brightness at 65° shall not exceed 3465 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 72.3%.

MATERIALS: Chassis parts are die formed code gauge cold rolled steel.

FINISH: Multi-stage phosphate treated for maximum corrosion resistance and finish coat high reflectance baked white enamel.

SPECIFICATIONS (continued)

LENS: Prismatic lens is 50% DR (impact resistant) and 50% standard acrylic with a nominal thickness of 1/8", withstands 70 ft. lbs. impact without breaking. SCREWS: Tamper resistant holt head screws secure lens to housing. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902