Lightolier HSCXT Series Page 4 of, Ordering Information, Thermal Performance Of Hscxt Fixtures

Section 7/Folio Q10-33

	HAZARDLINE ENCLOSED INDUSTRIAL HSCXT SERIES
Page 4 of 4	CLASS I, DIVISION 2 LOCATIONS, GROUPS A,B,C,D; CLASS II, DIVISION I AND 2

GROUPS F AND G; CLASS III, DIVISION I, DIVISION 2 LOCATIONS, WET LOCATIONS

ORDERING INFORMATION

Explanation of Catalog Number. Example: HSCXT232120SOCW

HSC

HAZARDLINE:

Enclosed

Industrial

Fluorescent

XT

NUMBER OF

LAMPS IN WIDTH:

2 or 3 Lamps

(No 3 lamp 48HO)

Class I, Division 2

Class II, III

32

		BALLAST TYPE:				OPTIONS:
			<20THD	<10THD		Add appropriate
	1-2 Lamp Elec. T8		SO*	HI*		suffix to catalog
	1-3 Lamp Elec. T8		O3*	H3*		no., ie: (CW)
LAMP/FIXTURE					VOLTAGE:
LENGTH:					120 or 277
32 = T8
(Nominal 48")

OPTIONS/ACCESSORIES

COLD WEATHER BALLASTS: HO fixtures are standard with -20°F ballasts. To specify cold-weather (O°F) ballasts for RS fixtures, SUFFIX: CW.

45° ADJUSTABLE STAINLESS STEEL QUADRANT BRACKETS: Two sturdy “L” type adjusta-mounts with gaskets for field installation at top and side ends of fixture. Permit housing to be permanently surface- mounted and adjusted up to 45° in either direction in 5° increments. Provide wide- spread directed illumination where tasks are not fixed. Specify Bracket Catalog Number: NKH45.

THERMAL PERFORMANCE OF HSCXT FIXTURES*

Catalog	Lamps		Ambient	“T”	Fixture
Number	Quantity	Type	Temp. °C	Numbers	Temperature*
HSCXT132	2	T8	40	T-4A	120°C (248°F)
HSCXT332	3	T8	40	T-4A	120°C (248°F)

SPECIFICATIONS

MATERIALS: Chassis is non-corrosive one-piece seamless molded fiberglass reinforced polyester composite body suitable (T8 or T12 RS) for 40°C ambient temperatures, with 1/2" NPT (2 on top of body and 1 at each end of body, fully gasketed and fastened to body with two 1/4-20 machine screws and lockwash- ers within the fixture body.

WIREWAY: Full-length rigidly formed wireway cover with all electrical compo- nents retained to body with captive screws for easy removal and can be suspended with safety-chains for convenient handling and service.

FINISH: Body—white polyester composite with 85% minimum reflectivity. Power Channel/Reflector–phosphate primed, baked white acrylic enamel with minimum 86% reflectivity.

LENS FRAME: Stainless steel, non-corrosive 16-gauge steel frame gasketed with silicone, securely attached to frame. Hinges both sides.

LENS: 3/16" thick tempered glass.

LENS FRAME CLAMPS: Stainless spring steel toggle clamps.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902