HHM Specifications, Optional Accessories | Socket Mobile GFK0121E

1

HHM Specifications

Operatingtemperature

Storagetemperature

Humidity

Weight: withoutcase withcase

Size (HxWxD): withoutcase withcase

Required AC power (for battery charger)

Fully chargedoperation

Displaycharacters

Keyboard

Features

Displaylanguage

Drop Test

DataRates

0±60 C(32±140 F)

±40 to +70 C(±40 to 158 F)

5-95%(non-condensing)

1.3lbs (0.6 Kg)

1.8lbs (0.8 Kg)

8.00º xº 3.75 xº 1.25 (cmx) 10.85º x 4.30º x 2.25º 115/230VAC 15%, 47-63 Hz

(16-hourchargingperiodforIC660BPM500B.

8-hour charging period for IC660BPM500A, now discontinued.)

6 hours

4 lines each of 16 LCD (0.2º - 5 mm high)

20 sealed keys with tactile feedback

PerformsGeniusI/Oblockconfiguration,monitors I/O data on Genius bus, displays diagnostic in- formation.

English,German, French, or Italian

Survives drop from 4 feet (1.2 meters) to concrete floor landing on any surface or corner without af- fecting its operation.

153.6Kbaud standard, 153.5 Kbaud extended,76.8 Kbaud,38.4Kbaud

Ordering Information

Description

Hand-Held Monitor (includes all items listed below)

Cable from HHM to I/O Block

Battery Pack

Battery Charger

Catalog Number

IC660HHM501

IC660HHC005

IC660BPM500

IC660BCM501

Optional Accessories

External HHM Connector: A panel-mountable or DIN rail-mountable HHM connector (catalog number 44A736310-001-R001) is available. It can be used to provide a permanent HHM connection point on a Genius bus. See chapter 2 for a description.

230VAC Power Adapter: An optional 230VAC Power Adapter (IC660MCA512) can be used to connect the Hand-held Monitor Charger to variety of 230 VAC power outlets by means of a standard computer cable (not supplied). See chapter 2 for a description.

Extra HHM Keys: For applications requiring extra keys for the Hand-held Monitor, a group of five sets can be ordered separately. The catalog number is IC660MKS511.

GFK-0121E

Chapter 1 Introduction

1-5

Image 10

Socket Mobile GFK0121E manual HHM Specifications, Optional Accessories

Contents

GE Fanuc Automation GFL±002 Content of this Manual Related Publications Preface Contents Chapter Introduction Hand-held Monitor Description HHM Keypad Accessories KeyswitchHHM Display HHM Compatibility HHM Specifications Optional Accessories Charging the Battery Pack for AC Operation Selecting 120 VAC or 230 VAC Using the 230VAC Power Adapter Instructions Charging the Battery Pack Battery OperationLow Battery Power Replacing the Battery Pack Changing the Prom Conductive mat Permanent Installation Configuring a Permanently-installed HHM HHM Installation Instructions Cutout Installing the D-Shell HHM Connector SER Installing a Separate Hand-held Monitor Connector Mounting the HHM Connector Making the Bus Connections Chapter Getting Started Setting the HHM Baud Rate Powerup Error Messages Displaying the Home Menu Main HHM Screens Configuring the Hand-held Monitor Changing the HHM Device Number Selecting the Host CPU Changing the HHM Display LanguageEnabling/Disabling Automatic Shutoff Enabling/Disabling the Ability to Clear Faults Enabling/Disabling the Ability to Force I/O Circuits Testing the Keypad Testing Operation of the Hand-held MonitorTesting the Internal Electronics Testing the Display Screen Chapter Device Configuration Overview Online Configuration Online or Offline ConfigurationStarting Configuration Offline Configuration Displaying the Configuration Menus Completing the Program Block ID Screens To Set the I/O Map for a Remote I/O Scanner Configuration Notes Configuring the Remote Drop Configuring Block Features ConfiguringGenius BlocksCopying a Configuration Configuration Instructions Change the Bus Address Configure Additional FeaturesSelect a PLC Reference Address Disable the I/O Scan Configuring Individual Field Control ModulesConfigure Data Addresses and Lengths Add Modules and Assign References Configuring Module FeaturesAssign I/O References for the Module Chapter Monitoring the Bus and its Devices Displaying Information About Bus Devices Selecting Another Device Switching a Dual Bus Monitoring the Bus Status Making the Block Active Monitoring a Genius BlockMonitor Block Display for Discrete I/O and Input Blocks Block References Monitor Block Display for Discrete Relay OutputBlocks Monitor Block Display for Analog Blocks Preset Outputs Monitor Block Display for a High-speed Counter Block Monitor Block Display for a PowerTRACBlock Calculated Data Basic Monitor/Control Display Format Clearing Circuit Faults DiagnosticsForcing an Input or Output Forcing an Analog, RTD, or Thermocouple Value PowerTRAC Data Sequence Monitor/Control Reference Displays for a PowerTRAC BlockSelecting a Memory Type or Address PowerTRAC Extra Calculated Data Lpio Screens PowerTRAC Status Inputs ScreensPowerTRAC Calculated Data Screens PowerTRAC Control Outputs Screens Monitoring/Controlling Remote Drop Data Displaying Other Circuits Clearing Faults Displaying and Clearing Remote Drop FaultsForcing a Circuit Displaying Another Reference Changing the Display ModeMonitoring/Controlling Field Control Data Returning to the Previous Menu Displaying Field Control Faults Clearing Field Control Faults Pulse Test Error Messages Pulse Testing Outputs on Discrete Genius BlocksClearing Pulse Test Faults Executing a Pulse Test Chapter Reading CPU Memory General Instructions Series 90 PLC Enter or Change the PLC Type Series Six PLCEnter or Change the Memory Location Series Five PLC Data Changing the Data Format Changing the Selected Address Chapter Error Messages Powerup Error Messages Operating Error Messages Configuration Error Messages Index Index-2 Index-3 Index-4