3 |
Enabling/Disabling the Ability to Change the Baud Rate of Devices on the Bus
The next configuration screen shows whether the HHM is able to change the baud rate of bus devices.
Enabling/Disabling the Ability to Force I/O Circuits
The next display shows whether the HHM can be used to force I/O circuits.
C H N G B L K B A U D
E N A B L E D
C I R C U I T F O R C I N G
E N A B L E D
To change the current selection, press F2 (Toggle), then press F3 (Enter).
Enabling/Disabling the Ability to Configure Devices on the Bus
The next display shows whether the HHM is able to change the other configurable features of bus devices.
C H N G B L K C O N F I G
E N A B L E D
To change the current selection, press F2 (Toggle), then press F3 (enter).
Enabling/Disabling the Ability to Clear Faults
The next display shows whether the HHM can clear faults on bus devices.
C L E A R B L K F A U L T S
E N A B L E D
To change the current selection, press F2 (Toggle) then press F3 (Enter).
