Lightolier LIS9G12PR132 Photometry, Ordering Information, Options/Accessories, Specifications

Lytecel Recessed Fluorescent LIS9G12PR132

Page 2 of 2 9" x 48", 12 Cell (1 Row) Parabolic Louver, Static or Air Supply/Return, 1 Lamp T8 IES RP1 For VDT Areas

Photometry

Model No. LIS9G12PR132120SO	LER = FP - 53.2 IW - 32 BF - 0.92
	Comparative yearly lighting energy cost per 1000 lumens = $4.51

G02090

LIS9G12PR132120SO

THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY VARY FROM LABORATORY PERFORMANCE.

coefficients of utilization — zonal cavity method

	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
	1	73	71	69	67	66	65	65	64	63
ratio	2	69	65	62	62	59	57	60	58	56
	3	64	59	56	57	54	51	55	53	50
cavity	4	60	54	50	52	49	46	51	48	45
	5	56	50	45	48	44	41	47	43	41
room	6	53	46	41	44	40	37	43	40	37
	7	49	42	37	41	37	34	40	36	34
	8	46	39	34	38	34	31	37	33	31
	9	43	36	31	35	31	28	34	31	28
	10	41	33	29	32	29	26	32	28	26

visual comfort probability

room size				ceiling height					ceiling height
W	L		8.5	10.0	13.0	16.0		8.5	10.0	13.0	16.0
20	20		92	95	93	82		99	98	97	92
20	30		93	95	93	83		99	98	97	94
20	40		93	95	93	83		99	98	98	94
20	60		95	96	93	83		99	98	98	94
30	20		93	95	94	85		99	98	97	93
30	30		93	95	93	86		99	98	98	94
30	40		93	95	93	86		99	98	98	94
30	60		96	96	94	886		99	98	98	94
30	80	lengthwise	96	97	94	86	crosswise	99	98	98	94
40	40		93	95	94	86		99	98	98	94
40	20		93	95	94	86		99	98	98	93
40	30	luminaries	93	95	93	86	luminaries	99	98	98	94
40	60		96	96	94	86		99	98	98	94
40	80		97	97	94	86		99	98	98	94
40	100		97	97	94	86		98	98	98	94
60	30		93	95	94	86		99	98	98	94
60	40		93	95	94	86		99	98	98	94
60	60		95	96	94	86		99	98	98	94
60	80		97	97	94	87		99	98	98	94
60	100		96	97	95	87		98	98	98	94
100	40		93	95	94	86		99	98	98	94
100	60		97	96	94	87		99	98	98	94
100	80		97	97	93	87		98	98	98	94
100	100		96	97	93	87		98	98	98	95

Ordering Information

Explanation of Catalog Number. Example: LIS9G12PR132120SOGLR

LI

9

12

R

1

Blank = Standard

Body Style:

Ceiling

Type:

Louver

Finish:

Lamp

N = NYC Code

A=Air Handling

G= Grid (lay-in T bar)

P=Low

Quantity

S=Static

T=Slot grid or

Iridescence

two-directional

Specular

LI:

Fixture

concealed T

Number of

L=Low

Anodized

Width

(see options)

Cells:

Iridescence

Aluminum

1 row of

Semi-specular

Louver

12 cells

for VDT use

Reflector:

R= Semi-Specular

95%

Reflective

32

	Voltage:				Options:
	120 or 277			Add appropriate
				suffix to catalog
				no, ie: (GLR)
Lamp Fixture
Length:
		Ballast type:
32=T8
			<20THD		<10THD
(Nominal 48")	1 Lamp Elec. T8
			SO*		HI*

*Instant Start Standard

Other dimming options, consult factory.

DA=DALI digital addressable dimming.

Options/Accessories

Access Plate: Top Wiring access plate is shipped with fixture as standard. When access plates are required in advance for wiring convenience, specify separately. Order Catalog Number: ACP5 CSP.

Electrical/Wiring Options: Consult factory.

Fusing: Internal fast-blow fusing. Suffix: GLR.

Internal slow-blow fusing. Suffix: GMF.

Air Closure Strips: Suffix: ACS4 (factory installed).

Drywall Kit: Order Catalog Number: FK99X4.

Chicago Plenum: Suffix: CP.

Specifications

Performance: In an installation of 1 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .70 with a spacing to mounting ratio of 1.9 perpendicular to the lamps. To meet IES RP-1 for VDT areas the VCP (visual comfort probability) shall not be less than 96 either crosswise or lengthwise and the candela value between 55° and 90° in the 0° to 90° planes shall not exceed 195. Candelas at Nadir (0°) not to exceed 525.

Air handling: (LIA only) side air passages for air supply or air return. Optional side closure strips.

Specifications (continued)

Materials: Chassis parts are die-formed cold rolled steel. Housing is with all edges turned-in for safe handling.

Louver: Pre-anodized aluminum (Coilzak@ or equal).

Finish: Louver—specular low iridescence pre-anodized reflector sheet.

Reflector: Semi-Specular reflector sheet, 95% reflective. Chassis exterior— black baked polyester enamel.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company		www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Copyright 2003 Lightolier		Section2/Folio G07-10