Manuals / Pioneer / Musical Instruments & Equipment / Musical Instrument

Pioneer Efx-500 operating instructions Troubleshooting, Specifications

Models: Efx-500

1 80
Download 80 pages 57.24 Kb
Page 26
Image 26

TROUBLESHOOTING

Incorrect operation can be mistaken for a malfunction. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect operation may be due to a malfunction in another component. If the problem cannot be solved using the information in the chart, check the other components used with the unit. If the problem still persists, contact your nearest authorized Pioneer service center.

Symptom

Remedy

 

 

No effect is generated.

Turn the MIX dial clockwise (in “EFFECT” direction).

 

Turn the DEPTH dial clockwise (in “MAX” direction).

 

Turn the EFFECT OUT LEV dial clockwise (in “MAX” direc-

 

tion).

 

 

The effect is distorted.

Turn the INPUT LEVEL dial counterclockwise (in “MIN” di-

 

rection).

 

Turn the EFFECT OUT LEV dial counterclockwise (in “MIN”

 

direction).

 

Turn the DEPTH dial counterclockwise (in “MIN” direction).

 

 

Echo is output continuously.

Turn the DEPTH dial counterclockwise (in “MIN” direction).

 

 

BPM cannot be measured in the AUTO mode.

The measurement range is 70 to 180.

 

It may not be possible to measure some tunes.

 

Invoke the TAP mode and make a manual setting (see P. 20).

 

 

The MIDI sequencer is not synchronized.

Set the MIDI sequencer mode to slave mode.

 

A MIDI sequencer that does not support the MIDI timing clock

 

cannot be synchronized.

 

 

The sound cannot be monitored via the headphones.

Turn the MONITOR dial clockwise (towards the “MAX” po-

 

sition).

 

ECHO cannot be monitored when the BEAT EFFECTS lever

 

switch is set to “OFF.” Should this be the case, switch the

 

effect to DELAY to obtain the same effect.

 

 

¦Static electricity and other external influences may cause this unit to malfunction. Should this happen, disconnect the power plug, wait for 30 seconds and connect the power plug again. If this does not solve the problem, contact your nearest authorized Pioneer service center.

SPECIFICATIONS

1. General

Power supply

220 V - 240 V AC, 50 Hz

Power consumption

14 W

Operating temperature

+5°C to +35°C

Weight

2.0 kg

Maximum external dimensions

................................. 277.1 (W) x 225.1 (D) x 83.5 (H) mm

2. Audio Unit

Sampling rate

48 kHz

A/D, D/A Resolution

20 bits

Frequency characteristics

20 Hz to 22 kHz

S/N ratio

83 dB

Total harmonic distortion

0.01 % or less

Input level

–10 dBu / +4 dBu (22 kΩ)

Output level

–10 dBu / +4 dBu

(RCA pin jacks: 1 kΩ, Phone jacks: 600 Ω)

*–10 dBu / +4 dBu is switchable.

Number of channels

2 channels (stereo)

26

<DRB1236> En/Fr

3. Input/Output terminals

 

Audio line output terminal

 

RCA pin jacks

2

Phone jacks (6.3 mm in diameter)

2

Audio line input terminal

 

RCA pin jacks

2

Phone jacks (6.3 mm in diameter)

2

MIDI output terminal (5-pin DIN)

1

MIDI input terminal (5-pin DIN)

1

Headphone output terminal

 

(6.3 mm in diameter, stereo)

1

4. Accessories

 

Operating instructions

1

Guide plate

1

NOTE:

Specifications and design are subject to possible modification without notice.

Published by Pioneer Electronic Corporation.

Copyright © 1998 Pioneer Electronic Corporation.

All rights reserved.

Page 25 Page 27
Page 26
Image 26
Pioneer Efx-500 operating instructions Troubleshooting, Specifications
Page 25 Page 27

Efx-500 specifications

The Pioneer EFX-500 is a dynamic and innovative effects processor designed specifically for DJs and live performers seeking to elevate their sound and enhance their mixes. As part of the renowned Pioneer family of DJ equipment, the EFX-500 stands out for its versatility and thorough design that caters to a wide range of audio manipulation needs.

One of the standout features of the EFX-500 is its extensive array of effects. It boasts 24 different effects and filter types such as Echo, Flanger, Phaser, and Reverb, providing DJs with the tools to create unique soundscapes and textures. The ability to manipulate these effects in real time allows for spontaneous creativity during live performances.

Another impressive aspect of the EFX-500 is its intuitive user interface. The device features a large variety of knobs, sliders, and buttons that allow for easy navigation and adjustment of effects parameters. The layout is designed to facilitate quick access to key functions, enabling DJs to seamlessly integrate effects into their set without breaking the flow of their performance.

The EFX-500 also incorporates advanced technologies like the Beat Counter and its BPM Lock function. This feature allows DJs to synchronize the effects with the tempo of their tracks, ensuring that the effects feel natural and seamless in the mix. The Beat Counter provides visual feedback on the tempo, enhancing the user’s ability to manage timing and rhythm effectively.

Characteristically, the device is built with durability in mind. Its robust design can withstand the rigors of a live performance environment, making it a reliable choice for mobile DJs and club performers alike. The EFX-500 is compact and lightweight, allowing for easy transport between gigs without compromising on performance quality.

Furthermore, the EFX-500 is equipped with a send/return loop, enabling the connection of external effects processors or instruments to further expand its creative possibilities. This feature is invaluable for advanced users looking to integrate additional hardware into their setups.

Overall, the Pioneer EFX-500 is a powerful and sophisticated effects unit that combines quality features, user-friendly design, and exceptional build quality. Whether performing in a club, at a festival, or during a private event, the EFX-500 provides DJs with the tools needed to captivate and energize their audience.