Lightolier SPS2GFSVA232 Photometry, Ordering Information, Plaster Frames Catalog Number PF24

Section 1A/Folio E60-30

SPECPLUS SPS2GFSVA232

Page 2 of 2 2'x4' RECESSED FLUORESCENT, LENS FRAME TROFFER, STATIC, 2 LAMP, T8 OR T12

PHOTOMETRY

MODEL NO. SPS2GFSVA232							Luminaire Efficacy Rating
							LER-67.4 Watts-61.2 BF-0.87
coefficients of utilization — zonal cavity method						(effective floor cavity reflectance 0.20)
	RF		20			20			20
	RC		80			50			30
	RW	70	50	30	50	30	10	50	30	10
ratio	1	91	88	84	82	80	77	79	77	75
	3	77	68	62	65	60	55	62	58	54
	2	84	77	72	73	69	65	70	67	64
cavity	4	70	61	54	58	52	48	56	51	47
	5	65	55	48	52	46	42	50	45	41
room	6	60	49	42	47	41	37	46	40	36
	8	52	41	34	39	33	29	38	33	29
	7	56	45	38	43	37	33	42	36	32
	9	49	38	31	36	30	26	35	30	26
	10	46	35	28	34	28	24	33	28	24

visual comfort probability			(rated lumens per lamp 3150.)
room size				ceiling height					ceiling height
W	L	8.5		10.0	13.0	16.0		8.5	10.0	13.0	16.0
20	20		71	76	82	88		71	74	79	85
20	30		66	69	75	80		67	69	72	77
20	40		62	65	70	75		65	67	69	72
20	60		59	62	66	70		63	65	67	69
30	20		73	77	81	86		72	75	79	84
30	30		66	70	73	78		68	70	72	76
30	40		62	65	69	72		65	67	68	70
30	60	lengthwise	58	61	64	68	crosswise	62	64	65	67
40	40		63	66	69	72		66	68	69	70
30	80		56	59	61	65		61	63	63	65
40	20		75	78	82	86		74	77	80	84
40	30		68	71	74	78		69	71	73	76
40	60	luminaries	59	62	64	67	luminaries	63	65	65	67
40	80		57	59	60	63		61	63	63	65
40	100		56	57	58	61		60	62	62	63
60	30		69	72	75	78		70	72	74	76
60	40		64	67	69	72		66	68	69	71
60	60		59	62	63	66		63	65	65	67
60	80		57	59	60	63		61	63	63	64
60	100		55	57	57	60		59	61	61	63
100	40		67	70	71	74		69	70	71	73
100	60		62	64	65	68		65	66	67	68
100	80		59	61	61	64		62	64	64	65
100	100		57	58	58	61		60	62	62	63

ORDERING INFORMATION

Explanation of Catalog Number. Example: SPS2GFSVA232120SORF

SP

SPECPLUS:

Recessed

fluorescent

troffer

S

STATIC

2

VA

2

FIXTURE

LENS

FRAME:

LAMP

VOLTAGE:

OPTIONS:

WIDTH

FS= Flat steel frame

QUANTITY

120 or 277

Add appropriate

RA=Regressed

suffix to catalog

aluminum frame

no., ie: (GLR)

FA=Flat aluminum

frame

BALLAST TYPE:

1–2 Lamp Mag. T12

LE

CEILING TYPE:

LENS/SHIELDING TYPE:

LAMP/

<20THD

<10THD

G= Grid (lay-in T bar)

VA (virgin acrylic)

FIXTURE LENGTH:

1–2 Lamp Elec. T8

SO*

HI*

F=Flanged (overlap) Z spline

standard (see options

32=T8

LOL T8 Dimming

PS

–

and plaster frame

and consult factory)

34=T12

(Nominal 48")

*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

SPECIAL LENSES: Substitute VB for VA (standard) = .125" nominal pattern 12 with 7.8 oz. average weight per square foot. Substitute VI for VA (standard) = .125" nominal pattern 12 with 6.8 oz. average weight per square foot.

PLASTER FRAMES: Catalog Number PF24 .

CONTINUOUS ROW INSTALLATION: For F type fixtures, half width flanges are required

between fixtures. Order Catalog Number: S2FCTRIM (each joint).

RADIO INTERFERENCE FILTER 120 or 277 volt, 50 or 60 Hz. One per fixture is standard. SUFFIX: RF.

FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing.

SUFFIX: GMF.

ELECTRICAL/WIRING OPTIONS: Consult factory.

DRYWALL KIT: Order Catalog Number: FK92X4.

Request Folio OA30-10.

CHICAGO PLENUM: SUFFIX: CP.

SPECIFICATIONS

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .88. To prevent glare the VCP shall be not less than 59 either lengthwise or crosswise (at 100fc level) and the average brightness at 65° shall not exceed 1640 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 69.4%.

SPECIFICATIONS (continued)

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side rails hemmed over and housing ends turned-in for safe handling.

FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester enamel minimum 86% reflectance. Phosphate undercoating.

LENSES: VA (standard) extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .095" nominal thickness (similar to pattern 12). VB (optional) .125" nominal pattern 12 with 7.8 oz. average weight per square foot. VI (optional) .125" nominal pattern 12 with 6.8 oz. average weight per square foot.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902