- 121 -
Wi-Fi
To print pictures wirelessly
The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet.
Follow the on-screen instruction to configure.
See the following website for information on the PictBridge (wireless LAN-compatible)
printer.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)

Select [Wireless Print] in the [Wi-Fi] menu. (P41)

If you have already set the connection destination, the confirmation screen is displayed. Select [Yes].
Press [ ] to quit [Wireless Print].
To print a single picture
Refer to “Selecting a single picture and printing it” on P148 for details.
To print multiple pictures
Refer to “Selecting multiple pictures and printing them” on P148 for details.
To change the connection destination
1Press [DISP.] on the destination confirmation screen.
2Press 3/4 to select the item, and press [MENU/SET].
To change the wireless access point
1Press [DISP.] on the destination confirmation screen.
2Press 3/4 to select [Change Access Point], and press [MENU/SET].
3Press 3/4 to select a name of registered wireless access point or [New Access
Point], and press [MENU/SET].
When you select [New Access Point], a new access point will be registered to this unit.
Note
Motion pictures cannot be printed out.