- 127 -
Wi-Fi
When connecting with [Addwireless AP]
1On the screen displayed in step 1 of “When connecting with [Manual Connection]”
(P126), select [Addw ireless AP] by pressing 3/4, then press [MENU/SET].
2Enter the SSID of the wireless access point you are connecting to, then select [Set].
For details on how to enter characters, refer to Entering Text section on P71.
3Press 3/4 to select the network authentication type, and press [MENU/SET].
For information on network authentication, see the manual of the wireless access point.
4Press 3/4 to select the encryption type, and press [MENU/SET].
The type of settings that can be changed may vary depending on the details of network
authentication settings.
[No Encryption] # A message is displayed when the wireless access point has been saved.
5(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
A message is displayed when the wireless access point has been saved.
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]