![](/images/new-backgrounds/1214309/21430925x1.webp)
3-8. Connecting Weld Cable
Setscrew
1
2
Connector Body | Sleeve | Weld Cable |
| Insulator | |
(Male Or Female) |
| |
|
|
A.Push weld cable through insulator as shown.
B.Remove 1 in. (25 mm) of insulation from end of cable.
C.Install supplied sleeve on stripped end of cable.
D.Insert cable with sleeve into connector body so that cable is snug and against bottom of connector body.
E.Install and tighten setscrew with supplied hex wrench to se- cure connector body onto cable.
F.Push insulator onto connector body to cover setscrew.
1Female Weld Cable Connec- tor (Supplied)
2Weld Cable (Customer Sup- plied)
Select weld cable according to welding power source Owner’s manual.
Install female weld cable connec- tor as shown.
3 Male Weld Cable Connector
Connect male and female weld cable connectors.
3
2
1
Ref.