Miller Electric DS-2 manual Connecting Welding Gun, Changing Nameplates

3-9. Connecting Welding Gun

1 2

3

4

1 Gun Securing Knob

Loosen knob.

2Gun Block

3Gun End

Slide gun end as far as possible into gun block and tighten gun se- curing knob.

4 Gun Trigger Plug

Connect gun trigger plug to match- ing receptacle on wire feeder.

Ref. ST-802 483-A

3-10. Changing Nameplates

	1	Pendant
	2	Nameplates
1	Pendant has three nameplates
	stacked one on top of the other.
	Each nameplate contains the volt-
2	age and amperage ranges for a dif-

ferent size flux cored welding wire (for reference only).

Unit is shipped with 1.2 mm wire nameplate on top. To change to 1.4 mm or 1.6 mm wire nameplate, re- move the four screws and bring the desired nameplate to the front. Install the four (4) screws back in place to hold the nameplates.

Tools Needed:

5/16 in

Ref. ST-802 483-A

OM-197 509 Page 10