- 11 -
Preparation
Insert the battery into the camera to charge it.
Check that this unit is turned off.
1Slide the release lever in the direction of
the arrow and open the card/battery
door.
Always use genuine Panasonic batteries.
If you use other batteries, we cannot guarantee
the quality of this product.
2Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check that
it is locked by lever A.
Pull the lever A in the direction of the
arrow to remove the battery.
31:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
Note
Turn the camera off and wait for the “LUMIX” display on the LCD monitor to clear before removing
the battery. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)
Inserting the Battery