- 71 -
Recording

Entering Text

It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1Display the entry screen.
You can display the entry screen via the following operations.
[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
[Location] in [TravelDate]
[Access Point], [LUMIX CLUB], [Device Name], [Extern al AV device], [Wi-Fi Password] in
the [Wi-Fi Setup] menu.
2Press 3/4/2/1 to select text and then press [MENU/

SET] to register.

Move the cursor to [ ] and then press [MENU/SET] to switch text
between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special
characters).
To enter the same character again, rotate the zoom lever towards [Z] (T) to move the cursor.
The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
[]]: Enter a blank
[Delete]: Delete a character
[ ]: Move the entry position cursor to the left
[ ]: Move the entry position cursor to the right
The following characters and numbers can be entered.
A maximum of 30 characters can be entered.
¢ A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
3Press 3/4/2/1 to move the cursor to [Set] and then press

[MENU/SET] to end text input.

Note
Text can be scrolled if all of the entered text does not fit on the screen.
It is displayed in order of [Location], [Name].