English-71
How to Attach the LCD TV to the Bracket
The LCD TVin the picture may not look exactly like yours.
(You assemble the plastic screw anchors and the screws the same way regardless of the model of your TV.)
Assemble the main body bracket as in the
pictures in 2. and below.
3
Put the four holders on the back of the TV
into the holes on the wall bracket, (1) lower
the TV, and (2) hang the TVon the bracket.
Fasten the TVsecurely to the wall bracket with
stickscrews as in (3) so that the two will not
separate.
4
Assemble the plastic screw anchors and the
screws. (See the picture below.)
1
Assemble the main body bracket as below
and put the plastic screw anchors in.
2
LCD TV
Wall bracket
Wall
1) Attach the plastic screw anchors to each of
the left/right brackets as in 1.
2) Assemble the bracket bars to the left/right
brackets as in the picture on the left.
They are left-right and upper-lower symmetrical
and the assembly direction does not matter.

Warning

1. Installing a wall bracket must be done by a
qualified professional installer.
2. After you hang the LCD TVon the wall
bracket, check from both sides to see if the
plastic screw anchors are securely in place.
3. Be careful not to get your fingers caught
during installation or while adjusting the angle
of the bracket.
4. The LCD TVmay fall from the wall and hurt
someone if the wall bracket is not attached
securely to the wall. Make sure the bracket is
screwed tightly to the wall.

venus-07-en 6/28/03 8:18 AM Page 71