English-11
INSTALLATION
3
Connect a coaxial
cable between the
ANTENNAOUT
terminal on the VCR
and the antenna
terminal on the TV.
4
Connect a set of
audio cables
between the AUDIO
OUTjacks on the
VCR and the AUDIO
jacks on the TV.
5
Connect a video
cable between the
VIDEOOUT jack on
the VCR and the
VIDEO jack on the
TV.

Follow the instructions in “Viewing a VCRor Camcorder Tape” to view your VCR tape.

# Each external input source device has a different back panel configuration.

Acoaxial cable is usually included with a VCR. (If not, check your local electronics store).

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook

up to the left and right audio input jacks of the TV. If your VCR is stereo, you must

connect two cables.

Connecting a VCR

These instructions assume that you have already connected your TVto an antenna or a

cable TVsystem (according to the instructions on pages 7-10).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANTENNAIN terminal
on the back of the
VCR.
venus-02-en 6/28/03 8:14 AM Page 11