AP P E N D I X
How to Install the Wall Bracket
List of Contents
|
| Wall bracket |
|
| Main body bracket | Screws | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Bracket bar
Plastic screw anchors: 4
1 Wall bracket plate
Screws: 4
2 Brackets (Left and Right) (The two brackets
are interchangeable.)
Screws: 8
2 Assembly hinges
(Make sure they are a left
/right pair.)
How to Adjust the Angle of the Bracket
Note: Please adjust the angle of the bracket to 0 degrees before you fix it to the wall.
Captive screws
Make sure you put the right hinge to the right side of the bracket and vice versa.
Be aware of the correct installation direction of the bracket when you set the angle to 30 and 32 degrees. (The direction for 30 and 32 degrees is indicated on the bracket surface.) When you first open the box, the bracket is not assembled.
Put the left and right brackets in the direction of the arrow and tighten the captive screws.
1.Attach the LCD TV onto the wall bracket. (Follow the instructions below.)
2.Pull the upper part of the LCD TV fixed to the bracket forward in the direction of the arrow and adjust the angle.
3.You can adjust the angle to your liking between 0°~20°(±2°).
