Top Panel Controls (cont.)
4. | BASS: This knob controls the low- |
| frequency sound of the 705iR. |
5. | AUX IN VOLUME: This knob |
| controls the volume level of an external |
| audio source that is plugged into the |
| AUX IN jack. An example would be a |
| computer, TV, VCR, CD or |
| cassette player. |
Rear Panel Connections
2
External
IR Sensor
6. AUX OUT VOLUME: This knob |
Carry
Jack
controls the audio level going to |
external equipment when plugged into |
the AUX OUT jack. For example, a |
personal FM transmitter or tape |
recorder. |
7. AUX INPUT JACK: This 3.5 mm |
jack is used to connect to an external |
audio source. |
8. AUX OUTPUT JACK: This 3.5 |
mm jack provides a |
output that can be connected to a |
personal FM system or tape recorder. |
Power and Signal Indicators
9.The LED light located above the CH A POWER knob turns red momentarily when the system power is turned ON.
When a transmitter/microphone set to Channel A is turned on, the Channel A LED glows green to indicate your transmitter’s signal is being received by the amplifier.
10.The LED above CH B VOLUME turns green to indicate a signal is being received from a transmitter set to Channel B.
Handle
|
|
| 4 |
| |
|
|
|
| ||
|
| Charging |
| ||
|
|
| LED |
| |
3 |
|
| 1 |
| 1 |
| |||||
Transmitter | DC |
| |||
Charging | Power |
| |||
Jacks | Input Jack |
|
1.DC POWER INPUT JACK: This input connects to the 16 V AC/DC adaptor that comes with the 705iR. The adaptor is used to either charge the internal battery pack or power the 705iR with AC power.
2.EXTERNAL IR SENSOR JACK: This jack is provided for connection of an additional sensor (for larger or
3.TRANSMITTER CHARGING JACKS: This connector is used to connect the charging cable to the LightMic transmitter or the optional
4.CHARGING LED: This LED glows red when the 705iR battery is charging and glows green when fully charged.
[4]