LightSpeed Technologies 705iR manual Optional HM-70 Handheld Microphone

Optional HM-70 Handheld

Microphone

The HM-70 handheld microphone is an optional microphone that can be ordered from LightSPEED. It can be used alone or in tandem with the LT-70 LightMic.

3Power/Charge LED

1Power Switch

slide to open

4		Battery
Charging Jack
	Compartment
Chanel Select Switch 2
Gain Adjust
top view of battery compartment

Optional HM-70 Handheld Microphone Controls

1.POWER SWITCH: This 3-position switch allows you to turn the micro- phone on (up position), mute the microphone (middle position), and turn off the microphone (down posi- tion). The red LED above the switch lights when the switch is in the “MUTE” or power “ON” positions.

2.CHANNEL SELECT SWITCH: This switch allows you to choose between Channel A or Channel B. This switch is set to Channel B at the factory.

3.POWER/CHARGE LED INDICATOR: This two-color LED indicator is located directly above the power switch. It glows red when the HM-70 is powered on and glows green when charging.

4.CHARGING JACK: Use the jack labeled CHARGER to connect the charging cable from the 705iR to the HM-70 for daily battery recharging.

[ caution! ]

Do not attempt to charge alkaline batteries̶they can overheat and expand, creating a significant hazard and damaging the LightMic.

(This is not covered by the warranty.)

[9]