Lightwave Communications

USB SERVERSWITCH

4.0 Operational Safety

The USB ServerSwitch should be installed in a suitable equipment room environment. It is designed for rack mounting in a 19-inch equipment rack.

A)The USB ServerSwitch is designed to operate in an ambient temperature of 0°C (32°F) to 50°C (122°F), 10-90% humidity, non-condensing. Ensure that closed or multi-unit racks maintain an ambient temperature not to exceed 50 °C (122 °F).

B)The USB ServerSwitch is designed to operate with convection cooling provided by the air holes located in both sides of the unit. Make sure that these ventilation holes are not obstructed by equipment placed directly in contact with either side of a USB ServerSwitch.

If the unit is placed on a shelf, be sure to allow air space around the unit for air flow, especially to the sides of the unit. The unit is shipped with four rubber feet which will raise the unit off of a counter or shelf and allow air flow beneath the unit.

C)Make sure that each USB ServerSwitch unit is properly supported in the front of the unit, by bolting the USB ServerSwitch into a standard 19 inch rack.

D)The USB ServerSwitch has a universal AC power supply which requires 90-253 VAC, 47-63 Hz at 0.5 ampere (protective fuse is 4 amperes). Power consumption is 12 watts. It is important for each unit to be supplied with the proper operating voltage and current.

E)All rack mounted equipment should be reliably connected to earth ground. Pay close attention to grounding at all times, particularly when equipment is not directly connected to power mains (such as when a power strip is used).

WARNING: The top cover should not be removed due to the potentially hazardous voltages in the unit. No user serviceable parts are inside the USB ServerSwitch. All repairs should be performed by Lightwave to avoid cancellation of the warranty.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

www.lightwavecom.com

Page 17 of 25

Page 16 Page 18
Page 17
Image 17
Lightwave Communications USB SuperSwitch manual Operational Safety
Page 16 Page 18

USB SuperSwitch specifications

Lightwave Communications has made a significant advancement in signal management with its innovative USB SuperSwitch, designed for seamless integration and efficiency in various digital environments. The USB SuperSwitch stands out as a versatile tool that allows users to manage multiple USB devices from a single point, enhancing the functionality and convenience of USB connectivity.

One of the main features of the USB SuperSwitch is its ability to support multiple USB connections simultaneously. The device typically allows users to switch between several USB inputs, making it ideal for situations where multiple computers or devices need access to the same peripherals, such as printers, scanners, or external storage. This capability streamlines workflows, reducing the need to constantly plug and unplug devices, which can lead to wear and tear over time.

The USB SuperSwitch employs advanced USB technology, ensuring compatibility with a wide range of devices, including USB 2.0 and USB 3.0 standards. Its high-speed data throughput ensures that users can transfer files and access devices without noticeable lag, making it suitable for both professional and personal use. The SuperSwitch is designed to handle data-intensive tasks, which is critical in environments where efficiency and speed are paramount.

An essential characteristic of the USB SuperSwitch is its user-friendly interface. It typically features a straightforward button switch or a remote control, allowing users to effortlessly toggle between connected devices. This design caters to both tech-savvy individuals and those less familiar with technology, ensuring that everyone can benefit from its capabilities.

Moreover, the USB SuperSwitch's compact and portable design makes it an excellent choice for both home and office settings. It can easily fit into any workspace without taking up significant space, which is a crucial consideration in today's often crowded environments. The device's durability and robust construction further enhance its appeal, ensuring that it can withstand regular use.

In addition, the USB SuperSwitch often includes features such as LED indicators that provide real-time feedback on which device is currently active, enhancing user experience and minimizing confusion. The device's plug-and-play functionality eliminates the need for complex software installations, allowing users to start using it right out of the box.

In conclusion, Lightwave Communications' USB SuperSwitch is a powerful, user-friendly solution for managing USB connections, making it a valuable addition to any tech setup. Its main features, advanced technologies, and practicality make it an ideal choice for anyone looking to optimize their USB device management.
Top Page Image Contents