General Options, Recommended Options, Mobiflex 200-M

GENERAL OPTIONS

LFA 3.1 (10 ft.) and LFA 4.1	Starter Overload Switch
(13 ft.) Extraction Arm	for 230V
Extraction arms with 360° rotat-	This overload switch retrofits the
able hood, airflow throttle valve,	extraction unit for 230V operation.
extraction focus spoiler, and han-	Order K1494-3
dle for every positioning. Hood
lamp and automatic start/stop
models available.
Order:	LongLife® 200-M Filter
K2633-1 LFA 3.1	Standard replacement LongLife®
K2633-2 LFA 3.1 with lamp/arc sensor	filter with ExtraCoat® treatment
K2633-3 LFA 4.1	that provides a 99.8% filter effi-
K2633-4 LFA 4.1 with lamp/arc sensor	ciency.
	Order K1673-1
Hose and Hood Set
Completely flexible extraction	Activated Carbon Filter
hose with magnetic hood set.	Mounts over LongLife® 200-M
Ideal for those hard to access	Filter and is recommended to
fume extraction applications.	neutralize welding fume odors.
Comes with 152 mm (6") diameter	Order K1852-1
hose and reinforced outside steel
rings to protect against wear and
crushing.
Order K1668-1
Lamp Kit with Arc Sensor
To conserve energy and extend
the life of your system, order the
lamp kit with arc sensor. It senses
an arc while the lamp illuminates
the work area. The arc sensor
turns on the unit when it senses
an arc flash and automatically
turns off 20 seconds after the arc
goes out. Also includes a manual
override on/off switch that works
independently of the arc sensor.
Kit includes work lamp with arc
sensor housing, switch bank,
and wiring.
Order K1706-2

Consult your local Lincoln Representative to help you decide which options are right for you!

Mobiflex™ 200-M

[3]	www.lincolnelectric.com