Auxiliary Power While Welding

A-8	INSTALLATION	A-8

Simultaneous welding and power loads are permitted by following Table I. The permissible currents shown assume that current is being drawn from either the 120V or 240V supply (not both at the same time). Also, the “Output Control” is set at “10” for maximum auxiliary power.

TAbLE I

SIMULTANEOUS WELDING AND POWER

Output Selector		Permissible Power	Permissible Auxiliary
	Setting	Watts (Unity Power	Current in Amperes
		Factor)	@ 120V *-or- @ 240V

Max. Stick or Wire
Feed Setting		None	0	0

180	Stick Setting	5100	42	21

130	Stick Setting	7200	60**	30

80	Stick Setting	8750	72**	36
No Welding		10,000	84**	42

*Each duplex receptacle is limited to 20 amps.

**Not to exceed 50A per 120VAC branch circuit when

splitting the 240 VAC output.

STANDbY POWER CONNECTIONS

The Ranger® 250 GXT is suitable for temporary, standby, or emergency power using the engine manu- facturer’s recommended maintenance schedule.

The Ranger® 250 GXT can be permanently installed as a standby power unit for 240V-3 wire, single phase 42 ampere service.

WARNING

(Connections must be made by a licensed electri- cian who can determine how the 120/240V power can be adapted to the particular installation and comply with all applicable electrical codes.) The following information can be used as a guide by the electrician for most applications (refer also to the connection diagram shown in Figure 1.)

------------------------------------------------------------------------

1.Install a double pole, double throw switch between the power company meter and the premises disconnect.

Switch rating must be the same or greater than the customer’s premises disconnect and service overcurrent protection.

2.Take necessary steps to assure load is limited to the capacity of the Ranger® 250 GXT by installing

a50 amp 240V double pole circuit breaker. Maximum rated load for the 240V auxiliary is 42 amperes. Loading above 42 amperes will reduce output voltage below the allowable -10% of rated voltage which may damage appliances or other motor-driven equipment.

3.Install a 50 amp 120/240V plug (NEMA type 14-50) to the Double Pole Circuit Breaker using No. 8,

4 conductor cable of the desired length. (The

50 amp 120/240V plug is available in the optional plug kit.)

4.Plug this cable into the 50 amp 120/240V receptacle on the Ranger® 250 GXT case front.

RANGER® 250 GXT

250 GXT specifications

The Lincoln Electric 250 GXT is a powerful and versatile welder designed to meet the needs of professionals and hobbyists alike. With its durable construction and advanced technology, this machine excels in a variety of welding applications, making it a popular choice for those looking to perform stick and TIG welding efficiently.

One of the standout features of the Lincoln Electric 250 GXT is its robust performance. It operates on a reliable 240-volt power source, providing ample power to handle a wide array of welding jobs. The machine has an impressive output range, delivering a maximum welding output of 250 amps, which allows for welding materials from thin sheets to heavy-duty steel components. This versatility makes it ideal for use in both industrial settings and home workshops.

The 250 GXT incorporates Lincoln Electric’s advanced Arc Control technology, which ensures a smooth and stable arc for a superior welding experience. This technology helps to reduce spatter and improve bead appearance, resulting in cleaner welds. Additionally, the machine features an adjustable arc force control, allowing users to tailor the arc characteristics based on the specific requirements of their welding tasks.

Another key characteristic of the 250 GXT is its ease of use. The machine is equipped with a user-friendly control panel, featuring straightforward knobs for setting the amperage and voltage. This intuitive design allows even novice welders to achieve excellent results with minimal training. Moreover, the unit is relatively lightweight and portable, fitting easily into mobile welding projects.

Durability is a hallmark of Lincoln Electric products, and the 250 GXT is no exception. Constructed with high-quality materials, it is built to withstand the rigors of regular use in demanding environments. The machine is also designed with safety features, including thermal overload protection, which prevents overheating and ensures longevity.

In summary, the Lincoln Electric 250 GXT is a top-tier welding machine that combines power, precision, and user-friendliness. Its advanced technologies, robust construction, and versatility make it an ideal choice for welders looking to tackle a wide range of projects with confidence and skill. Whether you are working on fabrications, repairs, or artistic endeavors, the 250 GXT delivers the performance and reliability that professionals demand.

Lincoln Electric 250 GXT manual Auxiliary Power While Welding, Simultaneous Welding and Power

Models: 250 GXT

INSTALLATION