Lincoln Electric 305G dimensions General Options, Stick Options

RECOMMENDED OPTIONS

GENERAL OPTIONS

Power Plug Kit

Provides four 120V plugs rated at 20

120Vamps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with common household receptacles.

Order K802N

Power Plug Kit

Provides four 120V plugs rated at 15

120Vamps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug is compatible with common household receptacles.

Order K802R

Full-KVA Power Plug

One dual voltage plug rated at 120/240V, 50 amps. NEMA 14-50P.

Order T12153-9

GFCI Receptacle Kit

Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installa- tion instructions. Replaces the fac- tory-installed 120V duplex recepta- cle. Each receptacle of the GFCI duplex is rated at 20 amps. Maximum total current from the GFCI duplex is limited to 20 amps. Two kits required for all 120V recep- tacles on the Ranger 305G.

Order K1690-1

Spark Arrester Kit

Attaches between muffler and exhaust elbow. Virtually eliminates spark emissions.

Order K1898-1

Canvas Cover

To protect the engine drive when not in use. Made from attractive red can- vas material that is flame retardant, mildew resistant and water repellent.

Order K886-2

All-Terrain Undercarriage

For moving by hand at construction sites. Maneuvers over obstacles. Heavy-duty puncture-resistant tires.

Order K1737-1

Factory Undercarriage

For moving by hand on smooth surface floors. Heavy-duty, puncture- resistant tires and front caster. Convenient steering handle.

Order K1770-1

GENERAL OPTIONS CONT.

Welding Gas Cylinder/

LPG Tank Holder

Holds welding gas cylinder or LPG tank (for products with LPG engine). For LPG: Use first holder for LPG tank and second holder for welding gas cylinder. Both holders will attach to the K1770-1 undercarriage.

Order K1745-1

Cable Carrier Kit

Holds two 100 ft. (30.5 m) lengths of #2/0 or smaller cable. Includes holder tray for electrodes or miscellaneous items. For use with K1737-1 or K1770-1 undercarriage.

Order K1739-1

Roll Cage

Improves damage protection and includes built-in cable rack. Attaches to K1737-1 or K1770-1 undercarriage. Can mount to a K2635-1 trailer.

Order K1788-1

Small Two Wheel Welder Trailer

For heavy-duty road, off-road, plant and yard use. Includes pivoting jack stand, safety chains, and 13" wheels. Stiff .120" welded rectangular steel tube frame construction is phosphate etched and powder coat painted for superior rust and corrosion resistance. Low sway suspension gives outstand- ing stability with manageable tongue weight. Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate® grease. Includes a Duo-Hitch™, a 2" ball/lunette eye combination hitch. Overall width 60".

Order:
K2635-1	Trailer
K2639-1	Fender & Light Kit
K2640-1	Cable Rack

STICK OPTIONS

Accessory Kit

For stick welding. Includes 35 ft. (10.7 m) #2/0 electrode cable, 30 ft. (9.1 m) #2/0 work cable, headshield, workclamp and electrode holder. 400 amp capacity.

Order K704

Accessory Kit

For Stick welding. Includes 20 ft.

(6.1 m) #6 electrode cable with lug,

15 ft. (4.6 m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode. 150 amp capacity.

Order K875

	Ranger® 305G
[5]	www.lincolnelectric.com