Lincoln Electric 305G dimensions TIG Options, Wire Feeders

RECOMMENDED OPTIONS

STICK OPTIONS CONT.

Remote Control Kit

Consists of a control box with choice of two cable lengths. Permits remote adjustment

of output.

Order K857 for 25 ft. (7.6 m)

K857-1for 100 ft. (30.5 m)

TIG OPTIONS

Pro-Torch®PTA-26V TIG Torch

Air-Cooled 200 amp torch equipped with valve for gas flow control.

25 ft. length.

Order K1783-9

Foot Amptrol

Varies current while welding for mak- ing critical TIG welds and crater fill- ing. Depress pedal to increase cur- rent. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle. Includes 25 ft.

(7.6 m) control cable.

Order K870

Hand Amptrol

Provides 25 ft. (7.6 m) of remote cur- rent control for TIG welding.

(6 pin plug connection). Velcro straps secure torch.

Order K963-3(one size fits all Pro- Torch TIG torches).

Magnum® Parts Kit for

PTA-26V TIG Torch

Magnum Parts Kit provides all the torch accessories you need to start welding. Parts kit provides collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable pack.

Order KP509

Precision TIG® 225 Ready-Pak®

For AC TIG welding with square wave performance, use the AC gen- erator of the engine-driven welder to supply the power. Easy setup. Includes torch, foot amptrol, gas reg- ulator and hose. Requires the

K1816-1 Full KVA adapter kit.

Order K2535-1

TIG OPTIONS CONT.

Invertec® V205-T AC/DC

One-Pak®Package

For AC TIG welding with square wave performance use the AC gen- erator of the engine-driven welder to supply the power. Easy setup. Includes torch, parts kit, regulator and hose kit, TwistMateTM torch adapter, work cable with Twist-Mate end, and foot Amptrol®. Requires the K1816-1 Full-KVA Adapter Kit.

Order K2350-1

Full - KVA Adapter Kit

Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 6- 50P) to the full-KVA receptacle on Lincoln engine-driven welders.

Order K1816-1

WIRE FEEDERS

LN-25 Wire Feeder

Portable CC/CV unit for flux-cored and MIG welding. Includes Gas Solenoid & Internal Contactor.

Order K449

LN-15 Across-The-Arc Wire Feeder

Portable CC/CV unit for flux-cored and MIG welding. Includes gas sole- noid, adjustable flow meter and internal contactor. For

10-15 lb. (4.5-6.8 kg) spools.

Order K1870-1

Remote Voltage Control (LN-25)

Provides 25 ft. (7.6m) of remote out- put control and output jumper

(2 and 4) for machines having 14-pin MS-type connector.

Order K444-2

Magnum® 350 Innershield Gun (for LN-25, LN-15)

For self-shielded wire with 15 ft. (4.5

m)cable. For .062-3/32”

(1.6-2.4 mm) wire.

Order K126-2

Drive Roll and Guide Tube Kit (for LN-25)

For .068-3/32” (1.8-2.4 mm) cored or solid steel wire.

Order KP653-3/32

Drive Roll and and Wire Guide Kit (for LN-15)

For 1/16” (1.6 mm) cored wire.

Order KP1697-1/16C

	Ranger® 305G
[6]	www.lincolnelectric.com