Lincoln Electric 350MP warranty General Options, Stick Options, TIG Options, Wire Feeder Options

RECOMMENDED OPTIONS

GENERAL OPTIONS

Dual Cylinder Mounting Kit

Permits side-by-side mounting of two full size gas cylinders, with easy loading. Attaches easily to Power MIG undercarriage.

Order K1702-1

Canvas Cover

Protect your Power MIG® when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repel- lent. Fits any Power MIG® machine with or without a gas cylinder in the cylinder rack. Will not fit if spool gun holder is attached to the machine.

Order K2378-1

STICK OPTIONS

Accessory Kit

Complete kit for stick welding. Includes 30 ft. (9.1 m) electrode cable, 25 ft. (7.6 m) work cable, headshield, work clamp and electrode holder.

Order K875 for 150 amps Order K704 for 400 amps

Remote Output Control

Consists of a control box with choice of two cable lengths. Permits remote adjustment of output.

Order K857 for 25 ft. (7.6 m) Order K857-1for 100 ft. (30.5 m)

TIG OPTIONS

PTA-17 150 Amp Air-Cooled

TIG Torch

Order K1782-2

for 12.5 ft. (3.8 m) length, 2-cable

Order K1782-4

for 25 ft. (7.6 m) length, 2-cable

PTA-26 200 Amp Air-Cooled

TIG Torch

Order K1783-2

for 12.5 ft. (3.8 m) length, 2-cable

Order K1783-4

for 25 ft. (7.6 m) length, 2-cable

Parts Kits

Magnum® Parts Kits provide all the torch accessories you need to start welding. Parts kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. Order KP508 for PTA-17 Order KP509 for PTA-26

Foot Amptrol®

Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection).

Order K870

Hand Amptrol®

Provides 25 ft. (7.6 m) of remote current control for TIG welding. (6-pin plug connection)

Order K963-3

Arc Start Switch

Needed if an Amptrol® is not used when TIG welding. Comes with a 25 ft. (7.6 m) cable. Attaches to the TIG torch for convenient finger control.

Order K814

Cut Length Consumables

TIG welding filler metals are avail- able for welding stainless steel, mild steel, aluminum and copper alloys.

See publication C9.10

WIRE FEEDER OPTIONS

Aluminum Feeding Kit

Conversion kit for welding with 3/64" (1.2 mm) aluminum wire. Includes drive rolls, contact tips (qty. 2), polished wire guides and cable liner.

Order K2153-1

Fast-Mate™Adapter

Allows guns with a Fast-Mate™type back end to plug into a Power MIG®.

Order K489-8

Power MIG® 350MP

[6] www.lincolnelectric.com