C-1

ACCESSORIES

C-1

 

 

 

GENERAL OPTIONS /

ACCESSORIES

The following options/accessories are available for your GX-271:

K886-1 Canvas Cover - To protect the GX-271 when it is not being operated. Made from attractive red can- vas material that is flame retardant, mildew resistant and water repellent.

K889-2 Two Wheel Undercarriage - For moving by hand. Two 4.00" x 8" pneumatic tires. Overall width 29" (.74m).

K893-1 Caster for K889-2 Undercarriage - Mounts to the front of the Two-Wheel undercarriage to allow easy movement on smooth surfaces. Includes a 6" diameter hard rubber wheel with a convenient toe-on,toe-off locking brake.

K933-1 Four Wheel Undercarriage - Allows move- ment of the GX-271 by hand without lifting on smooth surfaces. Includes two rugged, hard molded wheels and two durable pneumatic tires. The spring loaded handle provides convenient, comfortable steering. The K934-1 Bracket is available for mounting a gas cylinder on the undercarriage.

K934-1 Bracket for Mounting a Gas Cylinder to a K933-1 Undercarriage - Easily mounts on the back of the K933-1 Four Wheel Undercarriage to carry a weld- ing gas cylinder.

K957-1 Two-Wheeled Trailer - For in-plant or yard towing of the GX-271. Suitable for road towing with optional Fender and Light Kit. The following options are available for the K957-1Two-Wheeled Trailer:

K958-1 - Ball Coupler 2"

K958-2 - Lunette Eye Coupler

K959-2 - Fender & Light

K965-1 - Cable Rack

K894-1 Spark Arrester Kit - A field installed kit for the GX-271 engine muffler exhaust pipe. Includes a heavy-gauge steel, approved spark arrester, mounting clamp and adapter.

K703 Accessory Kit - Includes the following:

- Thirty-five feet (10.5 meters) of # 1/0 AWG elec- trode cable.

-Thirty feet (9.1 meters) of # 1/0 AWG work cable.

-Headshield with No. 12 filter.

-GC500 work clamp.

-Cooltong® 300 insulated electrode holder.

K802-R Power Plug Kit - Provides four 15 amp, 120 volt plugs and one 50 amp, dual voltage 120/240V, full kVA plug.

K857 Remote Control - Includes a control box with 25 feet (7.5 meters) of 4-conductor cable. Allows out- put voltage to be controlled remotely.

K857-1 Remote Control - Includes a control box with 100 feet (30.5 meters) of 4-conductor cable. Allows output voltage to be controlled remotely.

K896-1 GFCI Receptacle Kit - Includes two UL approved 120 volt ground fault circuit interrupter receptacles (duplex type) with covers and installation instructions. Each receptacle is rated 15 amps, but the maximum total current from each GFCI duplex is limited to 20 amps. The GFCI receptacles replace the two factory installed 120 volt duplex receptacles.

TIG WELDING OPTIONS /

ACCESSORIES

K930-1 TIG Module - The TIG Module is an accesso- ry that provides high frequency and shielding gas con- trol for AC and DC GTAW (TIG) welding applications. It provides contactor control of constant current weld- ing power sources having an internal contactor. The TIG Module is supplied without accessories, Arc Start switches, Amptrols, cables, torches and mounting brackets must be purchased separately.

K939-1 Docking Kit - For mounting the K930-1 TIG Module on top of the GX-271.

K936-1 Control Cable - Control cable for connecting the K930-1 TIG Module to a GX-271.

K814 Arc Start Switch - A remote start switch used in conjunction with the K930-1 TIG Module to energize the GX-271 output terminals via the TIG module.

K963 Hand Amptrol - Remote output control and contactor control.

K870 Foot Amptrol - Remote output control and con- tactor control.

GX 271 Chopper

Page 27
Image 27
Lincoln Electric GX 271 specifications General Options Accessories, TIG Welding Options Accessories