MAINTENANCE | ||
|
|
|
SAFETY PRECAUTIONS
WARNING
Have qualified personnel do the maintenance work. Turn the engine off before working inside the machine. In some cases, it may be necessary to remove safety guards to perform required maintenance. Remove guards only when necessary and replace them when the maintenance requiring their removal is complete. Always use the greatest care when working near moving parts.
Do not put your hands near any rotating parts. If a problem cannot be corrected by following the instructions, take the machine to the nearest Lincoln Field Service Shop.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or electrode with skin or wet clothing.
•Insulate yourself from work and ground
•Always wear dry insulating gloves.
ENGINE EXHAUST can kill.
•Use in open, well ventilated areas or
vent exhaust outside.
MOVING PARTS can injure.
•Do not operate with enclosure or guards off.
• Stop engine before servicing.
•Keep away from moving parts.
See additional warning information throughout this operator’s manual and the Engine manual as well.
ROUTINE AND PERIODIC ENGINE MAINTENANCE
At the end of each day’s use, refill the fuel tank to min- imize moisture condensation in the tank. Running out of fuel tends to draw dirt into the fuel system. Also, check the crankcase oil level and add oil if indicated.
ENGINE MAINTENANCE PARTS
TABLE D.1
| HondaGX 620 | Kohler CH 20 |
|
|
|
Oil Filter | Kohler 1205001 | |
| (Honda Code 3179553) | FramPH3614* |
| FramPH6811 |
|
Air Filter | Honda | Kohler 4708303 |
| (Honda Code 4209672) | Fram CA79 |
Air Filter | Honda | Kohler 2408302 |
(Honda Code 4209706) |
| |
Fuel Filter | Honda | Kohler 2505002 |
| (Honda Code 2106235) | Fram G1 |
SparkPlugs | NGK BPR6ES | Champion RC12YC |
| Nippondenso | .030 in., (.76 mm.) gap |
| .030 in., (.76 mm.) gap |
|
* Oil capicity increases from 2.0 Qts. to 2.1 Qts when using this filter.
GX 271 Chopper
