Lincoln Electric IM612 manual Operation

B-4 OPERATION B-4

10.WELD OUTPUT TERMINAL (TO ELECTRODE HOLDER) WITH FLANGE NUT: Provides the con- nection point for the electrode holder cable.

11.WELD OUTPUT TERMINAL (TO WORK) WITH FLANGE NUT: Provides the connection point for the work cable.

12.GROUND STUD: Provides a connection point for connecting the machine case to earth ground for the safest grounding procedure.

13.50 AMP, 115/230 VOLT RECEPTACLE: Connection point for supplying 230 volt power to operate one electrical device.

14.15 AMP, 115 VOLT DUPLEX RECEPTACLES: Connection point for supplying 115 volt power to operate one or two electrical devices.

15.CIRCUIT BREAKERS: Open the receptacle outlets if a fault is detected in the circuit.

16.GLOW PLUG PUSH BUTTON: Activates glow plug to preheat engine for cold weath- er starting.

17.FUEL LEVEL GAUGE: Displays the level of diesel fuel in the 9-gallon fuel tank. This gauge is not located on the control panel. It can be found on the fuel filler neck side of the machine between the case side and the engine, mounted in the fuel tank.

RANGER 8+ DIESEL