Lincoln Electric IM640-A manual Accessories, K2303-1 Sheet Metal KIT, K1690-1 Gfci Receptacle KIT

C-1	ACCESSORIES		C-1
K930-2Hi-Freq™ - Provides high frequency plus a		K2303-1 SHEET METAL KIT-	For SAE400 model
gas valve for TIG welding. A water valve is available as		K1278-5.

an option. Requires 115 volt AC input. (Limited to 250A - 60% Duty Cycle).

K802-D Power Plug Kit - Kit includes male plugs for each auxiliary receptacle.

K767-1 Trailer - A 4-wheel steerable trailer for in-plant and yard towing(1) with E78-14 load range (B) tubeless tires. Mounts directly to welder base.

K956-1Trailer - A 2-wheel trailer designed for road(1), off road, in-plant and yard towing. Trailer mounts directly to welder base.

1For highway use, consult applicable federal, state and local laws regarding possible requirements for brakes, lights, fenders, etc.

WARNING

Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.

------------------------------------------------------------------------

K704 Standard Accessory Kit - Includes electrode and work cables, headshield, work clamp and elec- trode holder.

K385-1 CV Adapter - Provides constant voltage output for semiautomatic welding. (Field installation only).

K2144-1 Oil Drain Kit - Includes ball valve, hose and clamp.

K1847-1 Spark Arrestor Kit

K1690-1 GFCI RECEPTACLE KIT

Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle with cover and installation instructions. Replaces the factory installed

120V duplex receptacle. Each receptacle of the GFCI Duplex is rated at 20 Amps, the maximum total current

from the GFCI Duplex is limited to the 20 Amps. Two kits are required.

SAE400 & SAE400 WELD’N AIR