A-3

INSTALLATION

A-3

LIFTING

The AIR VANTAGE® 500 lift bale should be used to lift the machine. The AIR VANTAGE® 500 is shipped with the lift bale retracted. Before attempting to lift the AIR VANTAGE® 500 the lift bale must be secured in a raised position. Secure the lift bale as follows:

a.Open the engine compartment door.

b.Locate the 2 access holes on the upper middle region of compartment wall just below the lift bale.

c.Use the lifting strap to raise the lift bale to the full upright position. This will align the mounting holes on the lift bale with the access holes.

d.Secure the lift bale with 2 thread forming screws. The screws are provided in the shipped loose parts bag.

WARNING

FALLING EQUIPMENT can cause injury.

• Do not lift this machine using lift bale if it is equipped with a heavy accessory such as a trailer or gas cylinder.

•Lift only with equipment of adequate lifting capacity.

•` Be sure machine is stable when lifting.

-------------------------------------------------------------------------------------

HIGH ALTITUDE OPERATION

At higher altitudes, output derating may be necessary. For maximum rating, derate the welder output 4% for every 300 meters (984 ft.) above 1500 meters (4920 ft.). For output of 500A and below, derate the welder output 4% for every 300 meters (984 ft.) above 2100 meters (6888 ft.).

Contact a Cummins Service Representative for any engine adjustments that may be required.

HIGH TEMPERATURE OPERATION

At temperatures above 40°C (104°F), output voltage derating may be necessary. For maximum output current ratings, derate welder voltage rating 2 volts for every 10°C (21°F) above 40°C (104°F).

TOWING

The recommended trailer for use with this equipment for road, in- plant and yard towing by a vehicle (1) is Lincoln’s K2636-1. If the user adapts a non-Lincoln trailer, he must assume responsibility that the method of attachment and usage does not result in a safety hazard nor damage the welding equipment. Some of the factors to be considered are as follows:

1.Design capacity of trailer vs. weight of Lincoln equipment and likely additional attachments.

2.Proper support of, and attachment to, the base of the welding equipment so that there will be no undue stress to the trailer’s framework.

3.Proper placement of the equipment on the trailer to insure stability side to side and front to back when being moved and when standing by itself.

4.Typical conditions of use, such as travel speed, roughness of surface on which the trailer will be operated, and environmental conditions.

5.Proper preventative maintenance of trailer.

6.Conformance with federal, state and local laws (1) .

(1)Consult applicable federal, state and local laws regarding specific requirements for use on public highways.

VEHICLE MOUNTING

WARNING

Improperly mounted concentrated loads may cause unstable vehicle handling and tires or other components to fail.

•Only transport this Equipment on serviceable vehicles which are rated and designed for such loads.

•Distribute, balance and secure loads so vehicle is stable under conditions of use.

•Do not exceed maximum rated loads for components such as suspension, axles and tires.

•Mount equipment base to metal bed or frame of vehicle.

•Follow vehicle manufacture’s instructions.

--------------------------------------------------------------------------------------

AIR VANTAGE® 500 CUMMINS

Page 10 Page 12
Page 11
Image 11
Lincoln Electric IM826-A manual Lifting, High Altitude Operation, High Temperature Operation, Towing, Vehicle Mounting
Page 10 Page 12

IM826-A specifications

The Lincoln Electric IM826-A is a state-of-the-art multi-process welder designed to meet the needs of professional welders in various industrial applications. Known for its advanced technology and robust performance, the IM826-A stands out as a reliable tool in the welding industry.

One of the main features of the IM826-A is its multi-process ability, allowing operators to seamlessly switch between MIG, TIG, and stick welding. This versatility makes the welder suitable for a wide range of materials, including steel, stainless steel, and aluminum, which is crucial for fabricators and manufacturers working with different types of metals. The ability to handle multiple processes in one machine minimizes the need for additional equipment, ultimately saving time and costs.

The IM826-A incorporates Lincoln Electric's proprietary inverter technology, which enhances its energy efficiency while providing consistent and stable arc performance. This technology allows for a lightweight design without compromising on power, making the welder more portable and easier to maneuver. It also helps in reducing energy consumption, which is a significant advantage for businesses focused on sustainability.

Another noteworthy characteristic of the IM826-A is its advanced control system. Featuring a digital display interface, users can easily adjust settings to achieve the desired welding parameters. This level of control enhances precision and accuracy in welding applications, ensuring high-quality results every time. Additionally, the IM826-A is equipped with a variety of built-in safety features, including thermal overload protection, which safeguards the machine from overheating during prolonged use.

Durability is another critical aspect of the IM826-A. The rugged construction of the unit ensures it can withstand the challenging environments often found in industrial settings. Its compact design makes it suitable for both shop and field use, enabling welders to work efficiently in various locations.

Overall, the Lincoln Electric IM826-A represents a significant advancement in welding technology. Its multi-process capability, inverter technology, intuitive control system, safety features, and robust design make it a preferred choice for professional welders. With the IM826-A, users can expect high performance, efficiency, and reliability, further solidifying Lincoln Electric's reputation as a leader in the welding industry.
Top Page Image Contents