A-2

INSTALLATION

A-2

Read this entire installation section before you start installation.

SAFETY PRECAUTIONS

WARNING

Do not attempt to use this equipment until you have thoroughly read all operating and maintenance manuals supplied with your machine. They include important safety precautions, detailed engine starting, operating and maintenance instructions and parts lists.

ELECTRIC SHOCK can kill.

• Do not touch electrically live parts such as output terminals or internal wiring.

•Insulate yourself from the work and ground.

•Always wear dry insulating gloves.

-------------------------------------------------------------------------------------

ENGINE EXHAUST can kill.

• Use in open, well ventilated areas or vent exhaust outside

-------------------------------------------------------------------------------------

MOVING PARTS can injure.

•Do not operate with doors open or guards off.

•Stop engine before servicing.

•Keep away from moving parts

-------------------------------------------------------------------------------------

Only qualified personnel should install, use or service this equipment.

LOCATION / VENTILATION

The welder should be located to provide an unrestricted flow of clean, cool air to the cooling air inlets and to avoid restricting the cooling air outlets. Also, locate the welder so that the engine exhaust fumes are properly vented to an outside area.

CAUTION

DO NOT MOUNT OVER COMBUSTIBLE SURFACES

Where there is a combustible surface directly under stationary or fixed electrical equipment, that surface should be covered with a steel plate at least .06”(1.6mm) thick, which should extend not less than 5.90”(150mm) beyond the equipment on all sides.

--------------------------------------------------------------------------------------

STORING

1.Store the machine in a cool, dry place when it is not in use. Protect it from dust and dirt. Keep it where it can’t be accidentally damaged from construction activities, moving vehicles, and other hazards.

2.Drain the engine oil and refill with fresh 10W30 oil. Run the engine for about five minutes to circulate oil to all the parts. See the MAINTENANCE section of this manual for details on changing oil.

3.Remove the battery, recharge it, and adjust the electrolyte level. Store the battery in a dry, dark place.

STACKING

AIR VANTAGE® 500 machines cannot be stacked.

ANGLE OF OPERATION

To achieve optimum engine performance the AIR VANTAGE® 500 should be run in a level position. The maximum angle of operation for the VMAC Compressor and Cummins engine is 35 degrees in all directions. When operating the welder at an angle, provisions must be made for checking and maintaining the oil level at the normal (FULL) oil capacity. Also the effective fuel capacity will be slightly less than the specified 25 gal.(94.6 ltrs.).

AIR VANTAGE® 500 CUMMINS

Page 9 Page 11
Page 10
Image 10
Lincoln Electric IM826-A manual Safety Precautions, Location / Ventilation, Storing, Stacking, Angle of Operation
Page 9 Page 11

IM826-A specifications

The Lincoln Electric IM826-A is a state-of-the-art multi-process welder designed to meet the needs of professional welders in various industrial applications. Known for its advanced technology and robust performance, the IM826-A stands out as a reliable tool in the welding industry.

One of the main features of the IM826-A is its multi-process ability, allowing operators to seamlessly switch between MIG, TIG, and stick welding. This versatility makes the welder suitable for a wide range of materials, including steel, stainless steel, and aluminum, which is crucial for fabricators and manufacturers working with different types of metals. The ability to handle multiple processes in one machine minimizes the need for additional equipment, ultimately saving time and costs.

The IM826-A incorporates Lincoln Electric's proprietary inverter technology, which enhances its energy efficiency while providing consistent and stable arc performance. This technology allows for a lightweight design without compromising on power, making the welder more portable and easier to maneuver. It also helps in reducing energy consumption, which is a significant advantage for businesses focused on sustainability.

Another noteworthy characteristic of the IM826-A is its advanced control system. Featuring a digital display interface, users can easily adjust settings to achieve the desired welding parameters. This level of control enhances precision and accuracy in welding applications, ensuring high-quality results every time. Additionally, the IM826-A is equipped with a variety of built-in safety features, including thermal overload protection, which safeguards the machine from overheating during prolonged use.

Durability is another critical aspect of the IM826-A. The rugged construction of the unit ensures it can withstand the challenging environments often found in industrial settings. Its compact design makes it suitable for both shop and field use, enabling welders to work efficiently in various locations.

Overall, the Lincoln Electric IM826-A represents a significant advancement in welding technology. Its multi-process capability, inverter technology, intuitive control system, safety features, and robust design make it a preferred choice for professional welders. With the IM826-A, users can expect high performance, efficiency, and reliability, further solidifying Lincoln Electric's reputation as a leader in the welding industry.
Top Page Image Contents