i

SAFETY

i

WARNING

CALIFORNIA PROPOSITION 65 WARNINGS

For Diesel Engines: diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.

For Gasoline Engines: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

ARC WELDING CAN BE HAZARDOUS. PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN AWAY. PACEMAKER WEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.

Read and understand the following safety highlights. For additional safety information, it is strongly recommended that you purchase a copy of “Safety in Welding & Cutting - ANSI Standard Z49.1” from the American Welding Society, PO Box 351040, Miami, Florida 33135 or CSA Standard W117.2-1974 or WTIA (Welding Technology Institute of Australia), PO Box 6165, Silverwater, NSW, 2128. A free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electrical Company, 22801 St Clair Avenue, Cleveland, Ohio 44117-1199.

BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

FOR ENGINE powered equipment.

1.a Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running.

1.b. Operate engines in open, well ventilated areas or vent the engine exhaust fumes outdoors.

1.c. Do not add fuel near an open flame, welding arc or when the engine is running. Stop the engine and allow it to cool before refuelling to prevent spilled fuel from vaporizing on contact with hot engine parts and igniting. Do not spill fuel when filling tank. If fuel is spilled, wipe it up and do not start engine until fumes have been eliminated.

1.d.Keep all equipment, safety guards, covers and devices in position and in good repair. Keep hands, hair, clothing and tools away from V-belts, gears, fans and all other moving parts when starting, operating or repairing equipment.

1.e.In some cases it may be necessary to remove safety guards to perform required maintenance. Remove guards only when necessary and replace them when the maintenance requiring their removal is complete. Always use the greatest care when working near moving parts.

1.f. Do not put your hands near the engine fan. Do not attempt to override the governor or idler by pushing on the throttle control rods while the engine is running.

1.g.To prevent accidentally starting petrol engines while turning the engine or welding generator during maintenance work, disconnect the spark plug wires, distributor cap or magneto wire as appropriate.

1.h. To avoid scalding, do not remove the radiator pressure cap when the engine is hot.

ELECTRIC AND MAGNETIC FIELDS may be dangerous

2.a.Electric current flowing through any conductor causes localized Electric and Magnetic Fields (EMF). Welding current creates EMF fields around welding cables and welding machines.

2.b.EMF fields may interfere with some pacemakers and welders having a pacemaker should consult their physician before welding.

2.c. Exposure to EMF fields in welding may have other health effects which are now not known.

2.d.All welders should use the following procedures in order to minimize exposure to EMF fields from the welding circuit:

2.d.1. Route the electrode and work cables together. Secure them with tape when possible.

2.d.2. Never coil the electrode lead around your body.

2.d.3. Do not place your body between the electrode and work cables. If the electrode cable is on your right side, the work cable should also be on your right side.

2.d.4. Connect the work cable to the workplace as close as possible to the area being welded.

2.d.5. Do not work next to welding power source.

Mar ‘95

Page 1 Page 3
Page 2
Image 2
Lincoln Electric IM826-A manual Safety, California Proposition 65 Warnings
Page 1 Page 3

IM826-A specifications

The Lincoln Electric IM826-A is a state-of-the-art multi-process welder designed to meet the needs of professional welders in various industrial applications. Known for its advanced technology and robust performance, the IM826-A stands out as a reliable tool in the welding industry.

One of the main features of the IM826-A is its multi-process ability, allowing operators to seamlessly switch between MIG, TIG, and stick welding. This versatility makes the welder suitable for a wide range of materials, including steel, stainless steel, and aluminum, which is crucial for fabricators and manufacturers working with different types of metals. The ability to handle multiple processes in one machine minimizes the need for additional equipment, ultimately saving time and costs.

The IM826-A incorporates Lincoln Electric's proprietary inverter technology, which enhances its energy efficiency while providing consistent and stable arc performance. This technology allows for a lightweight design without compromising on power, making the welder more portable and easier to maneuver. It also helps in reducing energy consumption, which is a significant advantage for businesses focused on sustainability.

Another noteworthy characteristic of the IM826-A is its advanced control system. Featuring a digital display interface, users can easily adjust settings to achieve the desired welding parameters. This level of control enhances precision and accuracy in welding applications, ensuring high-quality results every time. Additionally, the IM826-A is equipped with a variety of built-in safety features, including thermal overload protection, which safeguards the machine from overheating during prolonged use.

Durability is another critical aspect of the IM826-A. The rugged construction of the unit ensures it can withstand the challenging environments often found in industrial settings. Its compact design makes it suitable for both shop and field use, enabling welders to work efficiently in various locations.

Overall, the Lincoln Electric IM826-A represents a significant advancement in welding technology. Its multi-process capability, inverter technology, intuitive control system, safety features, and robust design make it a preferred choice for professional welders. With the IM826-A, users can expect high performance, efficiency, and reliability, further solidifying Lincoln Electric's reputation as a leader in the welding industry.
Top Page Image Contents