Spark Arrestor, Welding Output Cables | Lincoln Electric IM870-A

A-5	INSTALLATION	A-5

SPARK ARRESTOR

WARNING

• Spark Arrestor and Muffler may be hot!

Allow engine to cool before servicing spark arrestor! Do not operate engine while servicing spark arrestor!

Some federal, state or local laws may require that diesel engines be equipped with exhaust spark arrestors when they are operated in certain locations where unarrested sparks may present a fire hazard. The welder was shipped from the factory with a sepa- rate spark arresting unit. If a spark arrestor is required secure the spark arrestor to the outlet tube of the muf- fler using the clamp provided. Any spark arrestor must be serviced and properly maintained.

CAUTION

An incorrect spark arrester may lead to damage to the engine or adversely affect performance.

------------------------------------------------------------------------

WELDING OUTPUT CABLES

With the engine off, connect the electrode and work cables to the studs provided. These connections should be checked periodically and tightened if neces- sary.

Listed in Table A.1 are copper cable sizes recom- mended for the rated current and duty cycle. Lengths stipulated are the distance from the welder to work and back to the welder again. Cable sizes are increased for greater lengths primarily for the purpose of minimizing cable voltage drop.

Table A.1 Combined Length of Electrode and

Work Cables.

TOTAL COMBINED LENGTH OF ELEC-

TRODE AND WORK CABLES

AMPS	Up to 100 FT.	100-200 FT.	200-250 FT.
@60%	(Up to 30m)	(30m-61m)	(61m-76m)
Duty Cycle
400	2/0 AWG	3/0 AWG	4/0 AWG

MACHINE GROUNDING

Because this portable engine driven welder creates its own power, it is not necessary to connect its frame to an earth ground, unless the machine is connected to premises wiring (home, shop, etc.).

To prevent dangerous electric shock, other equipment powered by this engine driven welder must:

a)be grounded to the frame of the welder using a grounded type plug,

b) be double insulated.

When this welder is mounted on a truck or trailer, its frame must be securely connected to the metal frame of the vehicle. When this engine driven welder is con- nected to premises wiring such as that in a home or shop, its frame must be connected to the system earth ground. See the article on grounding in the latest U.S. National Electrical Code and the local code.

In general, if the machine is to be grounded, it should be connected with a #8 or larger copper wire to a solid earth ground such as a metal water pipe going into the ground for at least ten feet and having no insulat- ed joints, or to the metal framework of a building which has been effectively grounded. The U.S. National Electrical Code lists a number of alternate means of grounding electrical equipment. A machine grounding stud marked with the symbol is provid- ed on the welding generator frame foot.

SAE-400 SEVERE DUTY

IM870-A specifications

The Lincoln Electric IM870-A is a cutting-edge industrial robotic welding machine that has garnered attention for its advanced features and capabilities. Designed for high-performance applications, this welding system stands out in the manufacturing environment due to its versatility, precision, and efficiency.

At its core, the IM870-A is equipped with a high-speed manipulator that can handle various welding processes, including MIG, TIG, and flux-cored welding. This flexibility allows manufacturers to adapt the machine for a wide range of materials, including steel, aluminum, and stainless steel. The machine's robust construction ensures durability, making it a reliable choice for demanding industrial applications.

One of the standout features of the IM870-A is its intelligent control system. This system utilizes advanced programming and software to optimize welding parameters in real-time, ensuring consistent weld quality and reducing the likelihood of defects. The machine incorporates Lincoln Electric's proprietary arc control technology, which enhances the stability and reliability of the welding arc, further contributing to improved weld quality.

In addition to its welding capabilities, the IM870-A offers a user-friendly interface that simplifies operation and programming. The machine is designed with intuitive controls, allowing operators to quickly adjust settings and switch between different welding processes. This ease of use is critical in busy production environments, where time and efficiency are of the essence.

Another noteworthy characteristic of the IM870-A is its integration with Industry 4.0 technologies. The machine supports connectivity through IoT (Internet of Things) protocols, enabling remote monitoring and data analysis. This feature allows manufacturers to track performance metrics in real-time, leading to better decision-making and maintenance planning. The analytics provided can identify trends and areas for optimization, ultimately improving overall operational efficiency.

Safety is also a priority in the design of the IM870-A. The machine is equipped with multiple safety features, including automatic shutdown protocols in case of malfunction and protective enclosures to safeguard operators from high-temperature processes.

In summary, the Lincoln Electric IM870-A is a sophisticated welding solution that combines versatility, advanced technology, and user-friendly operation. Its intelligent control systems, Industry 4.0 capabilities, and strong emphasis on safety make it a valuable asset for manufacturers looking to enhance their welding operations and maintain high standards of quality. Whether in automotive assembly, metal fabrication, or other industrial sectors, the IM870-A is an exemplary choice for modern welding needs.

Lincoln Electric IM870-A manual Spark Arrestor, Welding Output Cables, Machine Grounding

Models: IM870-A

INSTALLATION