FIELD INSTALLED OPTIONS / ACCESSORIES
K903-1 SPARK ARRESTOR - Includes a heavy gage steel, approved spark arrestor, clamp and adapter for mounting to the muffler exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of elec- trode cable and 30 ft. (9.1m) of work cable, headshield, work clamp electrode holder. Cables are rated at 400 amps, 100% duty cycle.
K857 25 ft (7.6m) or K857-1100 ft. (30.4m) REMOTE
CONTROL
Portable control provides same dial range as the output con- trol on the welder. Has a convenient 6 pin plug for easy con- nection to the welder.
K1858-1 Service Indicator Kit- Provides a GO / NO-GO
visual indication of air cleaner element useful service life. Filter service based on restriction readings allows the longest life possible from the filter and best engine protec- tion.
K2641-2 Trailer - A 4-wheel steerable trailer for in- plant and yard towing. Comes standard with a Duo- Hitch™, a 2” Ball and Lunette Eye combination hitch.
K2642-1 Polarity/Multi-Process Switch- For easy polarity switching. Example: DC- stick root pass on pipe and DC+ stick for hot, fill and cap passes. Also for an easy process change. Example DC+ stick root pass on pipe and DC_ innershield self shielded flux core wire for hot, fill and gap passes. 6 and 14 pin remote connections can be made to this unit. For all lincoln Chopper technology engine-drive welders Mounts on roof with Docking Kit.
K2663-1 Docking Kit-Secures Polarity/Multi-Process Switch, mounts on the roof of all Lincoln Chopper technolo- gy engine-drives.
K2627-2 Remote Output Control with 120V AC Receptacle- Remote Output Control box with two 120V AC receptacles having GFCI (Ground Fault Circuit Interrupter) protection.
WIRE FEEDER OPTIONS
K2613-1 LN-25 PRO PORTABLE WIRE FEEDER-The MAXTRAC® wire drive enhances performance, while the replacement case, and many other upgrade options that can be installed in less then five minutes aid in the serviceability.
KP1697-5/64 Drive Roll Kit- Includes: 2 polished U
groove drive rolls, outer wire guide and inner wire guide for solid core wire. (Used on LN-25 Pro)
KP1697-068 Drive Roll Kit- Includes: 2 polished U
groove drive rolls, outer wire guide and inner wire guide for solid core wire. (Used on LN-25 Pro)
KP1696-1 Drive Roll Kit- Includes: 2 V groove drive rolls and inner wire guide for Steel Wires. (Used on LN-25 Pro)
K449 LN-25- Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid. For spools up to 44 LBS (20Kg).
K1870-1 LN-15 Across the Arc Wire Feeder.
Portable, lightweight, compact CC/CV unit for flux-cored and MIG welding. Includes Gas Solenoid, adjustable flow meter and internal contactor. For 10-15 lb. (4.5-6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.
K126-2Magnum 350 Innershield Gun
K1802-1Magnum 300 MIG Gun (for LN-25)
K470-2Magnum 300 MIG Gun (for LN-15, Includes Connector Kit)
K466-10Connector Kit (for LN-15, K470-2)
K1500-1Gun Receiver Bushing (for LN-15 & K126-2)
Note: See Wire Feeder IM manuals for appropriate Drive Roll and Guide Tubes.
TIG OPTIONS
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch Magnum Parts Kit provides all the torch accessories you need to start welding. Parts kit provides collets, collet bod- ies, a black cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable sack.
K870 Foot Amptrol®
K963-3 Hand Amptrol®
K2535-1 Precision TIG 225 Ready-Pak(For AC TIG)
K2350-2 Invertec® V205-T AC/DC One-Pak™ Package (For AC TIG)
PLASMA CUTTING
K1601-1Pro-Cut55-Cuts metal using the 3-phase AC gen- erator power from the engine driven welder. Accepts 3- phase power.
