v

SAFETY

v

 

 

 

Electromagnetic Compatibility (EMC)

Conformance

Products displaying the CE mark are in conformity with European Community Council Directive of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (89/336/EEC). It was manufactured in conformity with a national standard that implements a harmonized standard: EN 60974-10Electromagnetic Compatibility (EMC) Product Standard for Arc Welding Equipment. It is for use with other Lincoln Electric equipment. It is designed for industrial and professional use.

Introduction

All electrical equipment generates small amounts of electromagnetic emission. Electrical emission may be transmitted through power lines or radiated through space, similar to a radio transmitter. When emissions are received by other equipment, electrical interference may result. Electrical emissions may affect many kinds of electrical equipment; other nearby welding equipment, radio and TV reception, numerical controlled machines, telephone systems, computers, etc. Be aware that interference may result and extra precautions may be required when a welding power source is used in a domestic establishment.

Installation and Use

The user is responsible for installing and using the welding equipment according to the manufacturer’s instructions. If electromagnetic disturbances are detected then it shall be the responsibility of the user of the welding equipment to resolve the situation with the technical assistance of the manufacturer. In some cases this remedial action may be as simple as earthing (grounding) the welding circuit, see Note. In other cases it could involve construction of an electromagnetic screen enclosing the power source and the work complete with associated input filters. In all cases electromagnetic disturbances must be reduced to the point where they are no longer troublesome.

Note: The welding circuit may or may not be earthed for safety reasons according to national codes. Changing the earthing arrangements should only be authorized by a person who is compe- tent to access whether the changes will increase the risk of injury, e.g., by allowing parallel welding current return paths which may damage the earth circuits of other equipment.

Assessment of Area

Before installing welding equipment the user shall make an assessment of potential electromagnetic prob- lems in the surrounding area. The following shall be taken into account:

a)other supply cables, control cables, signaling and telephone cables; above, below and adjacent to the welding equipment;

b)radio and television transmitters and receivers;

c)computer and other control equipment;

d)safety critical equipment, e.g., guarding of industrial equipment;

e)the health of the people around, e.g., the use of pacemakers and hearing aids;

f)equipment used for calibration or measurement

g)the immunity of other equipment in the environment. The user shall ensure that other equipment being used in the environment is compatible. This may require additional protection measures;

h)the time of day that welding or other activities are to be carried out.

L10093 3-1-96H

Page 5 Page 7
Page 6
Image 6
Lincoln Electric IM917-A manual Electromagnetic Compatibility EMC
Page 5 Page 7

IM917-A specifications

The Lincoln Electric IM917-A is a highly advanced welding machine that caters to the needs of industrial and commercial applications. Designed for both expert welders and those new to the craft, this machine offers a rich combination of features and technologies that enhance performance and usability.

One of the standout features of the IM917-A is its robust inverter technology. This innovation allows the machine to provide consistent arc stability and improved control, even at low amperages. This means welders can achieve precision results in various materials, including carbon steel, stainless steel, and aluminum, without the risk of burn-through or warping. Additionally, the inverter design contributes to the IM917-A’s lightweight profile, making it portable and easy to transport to job sites.

The IM917-A employs advanced digital control systems that allow for precise adjustments and monitoring. Welders can access various pre-set programs tailored for different welding processes, significantly speeding up setup times. The intuitive user interface ensures that operators can quickly navigate through settings, achieving optimal parameters for each specific task. This ease of use makes the IM917-A accessible to less experienced welders while meeting the demands of seasoned professionals.

Another noteworthy characteristic of the IM917-A is its versatility. It supports multiple welding processes, including MIG, TIG, Stick, and flux-cored welding. This multi-process capability makes it an ideal machine for workshops looking to maximize their productivity without investing in multiple units. The ability to switch between these processes seamlessly allows users to adapt to various project requirements swiftly.

Safety is prioritized in the design of the IM917-A. It is equipped with features such as over-temperature protection and automatic shutoff, ensuring safe operation during prolonged use. Additionally, its durable construction and high-quality components enhance its reliability and longevity, making it a wise investment for businesses.

In conclusion, the Lincoln Electric IM917-A is a formidable choice for welders of all skill levels. Its combination of advanced inverter technology, user-friendly digital controls, versatile welding processes, and essential safety features sets it apart in the competitive welding equipment market. Whether for commercial, industrial, or even artistic applications, the IM917-A promises to deliver excellent performance and reliable results.
Top Page Image Contents