OPTIONAL EQUIPMENT (Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR SMALL WELDERS - For road, off-road and in-plant and yard towing. (For highway use, consult applicable federal, state and local laws regarding requirements for brakes, lights, fenders, etc.)
Order K957-1 Trailer K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 TWO-WHEEL UNDERCARRIAGE - For moving by hand. Overall Width 29 in (.74m) Both have pneumatic tires. Puncture proof tires included with K889-3.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER- CARRIAGE - For moving by hand at construction sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov- ing by hand on a smooth surface. One or two gas cylinders can be mounted on the rear of the undercar- riage with the installation of K1745-1 Cylinder Holder(s). Heavy duty puncture resistant pneumatic tires and front caster.
K1745-1 WELDING GAS CYLINDER LPG TANK HOLDER
Holds Welding Gas Cylinder for use on K1770-1 Undercarriage. One or two may be installed on an undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection. Attaches to K1737-1, K1770-1, and K957-1.
K886-1 CANVAS COVER -To protect the RANGER 3 PHASE when not in use. Made from attractive red canvas material which is flame retardant, mildew resistant, and water repellent.
K802R POWER PLUG KIT- provides four 120V plugs rated at 15 amps each and one dual voltage, Full KVA plug rated at 120/240V, 50 amps.
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps.
K704 ACCESSORY KIT - Includes 35 ft (10.7m) 2/0 AWG electrode cable, 30 ft. (9.1m) 2/0 AWG work cable, head- shield Filterplate, work clamp and electrode holder. 400 Amp. Capacity.
K875 ACCESSORY KIT - Includes 20 ft (6.1m) #6 elec- trode cable, headshield, filter plate, work clamp , electrode holder and sample pack of mild steel electrodes 150 Amp. Capacity. lug, 15ft. (4.6) #6 work cable
K894-1 SPARK ARRESTER KIT - Includes a heavy gauge steel, approved spark arrester and clamp for easy mounting to muffler exhaust pipe.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the 120/240V NEMA 14-50R receptacle on the case front (which accepts 4-prong plugs) and converts it to a NEMA 6- 50R receptacle, (which accepts 3-prong plugs.)
T12153-9 FULL-KVA POWER PLUG - One dual voltage plug rated at 120/240V, 50 amps.
K930-2 TIG MODULE - Provides high frequency and shield- ing gas control.for AC and DC GTAW (TIG) welding applica- tions. Its compact case is designed foe easy carrying, com- plete with a handle. High frequency bypass is built in Requires K938-1 Contactor Kit, K936-4 Control Cable, and K814 Arc Start Switch.
K938-1 CONTACTOR KIT - For use with TIG Module, Provides a “cold” electrode until the triggering device (Arc Start Switch) is pressed.
K936-4 CONTROL CABLE - Connects TIG Module to RANGER 3 PHASE. (9 Pin to 115V Plug)
K814 ARC START SWITCH - Attaches to the TIG torch for convenient finger control.
K937-45 CONTROL CABLE EXTENSION - Allows TIG Module to be operated at distances up to 200ft. from the power source. Available in 45ft. (13.7m) Sections.
K939-1 DOCKING KIT - For Mounting the K930-2 TIG Module on top of the RANGER 3 PHASE.
