Lincoln Electric IM959 manual Installation, Temperature Conversion Chart Celcius ºC Fahrenheit ºF

A-1				INSTALLATION				A-1
		TECHNICAL SPECIFICATIONS – COOL ARC						35
					®
	Product No. / Model					K2630-1 COOL ARC® 35
	Input				350VDC (From V310-T AC/DC & V311-T AC/DC)
	Current Draw						0.35 Amps
	Maximum Operating Pressure and Flow Rate					50 psi (345 kPa) (3.5 bar)Max.
	(Open Flow, Without Welding Torch Restriction)					1.2 gal/min. (4.6 liter/min) Max.
	Typical Operating Pressure and Flow Rate					53-57 psi (365-393 kPa)
	(With Welding Torch Restriction)					.45-.60 gal/min. (1.7-2.3 liter/min)
	Reservoir Size					1.3 gal. ( 5 liters)
				For Use Above Freezing: Clean tap, distilled or de-ionized water.
			For Use Below Freezing: 50% water and 50% pure ethylene glycol (reagent
						or industrial grade) mixture.
			DO NOT USE: Automotive anti-freeze that contains rust inhibitors or leak stoppers.
	Recommended Coolant		These coolants will damage the pump and block the small internal passageways of
			the heat exchanger, affecting cooling performance. To acquire the proper coolant
			contact a local welding distributor.
			DO NOT USE: Pre-packaged welding industry coolants. These coolants may contain
			oil-based substances, which attack the plastic components of the cooler. Once added
			to the cooler, these substances are impossible to purge from the water lines and heat
			exchanger.
		Shipping				29.8 lbs. (13.5 kg)
	Weight
		Reservoir				42.0 lbs. (19.0 kg)
		Full (Water)
		L				24.5 in. (622 mm)
		W				11.0 in. (280 mm)
	Dimensions
						10.0 in. (256 mm)
		H
				Temperature Conversion
					Chart
				Celcius ºC*		Fahrenheit ºF
				20		68
				30		86
				40		104
				50		122
				60		140
				70		158
				80		176
				90		194

COOL ARC® 35