TROUBLESHOOTING & REPAIR
F-30 F-30
Classic III and IIID
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
ENGINE THROTTLE ADJUSTMENT TEST (continued)
FIGURE F.11 - BLOWER PADDLE MARK LOCATION
STROBE
MARK
TEST PROCEDURE
STROBE TACH METHOD
1. Conduct this procedure with the engine OFF.
2. Unlatch, lift, and secure the right and left side
doors.
3. With the white or red marking pencil, place
mark on one of the blower paddles. See
Figure F.11.
4. Connect the strobe-tach according to the
manufacturer’s instructions.
5. Start the engine and direct the strobe-tach
light on the blower paddle and synchronize it
to the rotating mark.
With the machine at HIGH IDLE, the tach
should read between 1780 and 1810 RPM.
With the machine at LOWIDLE, the tach
should read between 1325 and 1475 RPM.