TROUBLESHOOTING | ||
Observe all Safety Guidelines detailed throughout this manual | ||
|
|
|
PROBLEMS | POSSIBLE | RECOMMENDED |
(SYMPTOMS) | CAUSE | COURSE OF ACTION |
STICK WELDING PROBLEMS
Stick electrode “Blasts Off” when arc 1. Weld current may be set too high
is struck.for electrode size. Reduce current control setting, or use a larger diameter electrode.
Stick electrode “sticks” in the weld 1. The weld current may be set too
puddle.low. Increase the current control setting or use a smaller diameter electrode.
If all recommended possible areas of misadjustment have been checked and the problem persists, Contact your local Lincoln Authorized Field Service Facility.
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
