Lincoln Electric WELDING SYSTEMS manual LINC-NET TM Control Cables, Recommended Options

LINC-NET TM CONTROL CABLES

These come standard with both bench and boom versions of the Power Feed 10 and Power Feed 10 Dual wire feeders. The Linc-Net con- trol cable has several advantages over existing control cables:

•Common cable for all parts - The same cable can be used between the power source and wire feeder in a bench system and between the power source, control box and wire drive in a boom system.

•Extension cord flexibility - These control cables can be connected end-to-end for length flexibility. A single, custom length cable is no longer needed.

•Extended lengths - These cables can be connected up to 200 ft. between any 2 components. This allows more flexibility in locating the power source and wire feeder.

Ordering Information:

Linc-Net Receptacles

Provides Linc-Net receptacles for converting a Power Feed 10 bench model to a boom model.

Order K1548-1.

Control Cable Only

K1543-8 8 ft. cable length

K1543-16 16 ft. cable length

K1543-25 25 ft. cable length

K1543-50 50 ft. cable length

K1543-100 100 ft. cable length

Control and Weld Cables (4/0 size)

K1544-8 8 ft. cable length

K1544-16 16 ft. cable length

K1544-25 25 ft. cable length

K1544-50 50 ft. cable length

RECOMMENDED OPTIONS

SPINDLE ADAPTER

For 14 lb. (6 kg) Innershield Coils Permits 14 lb. (6 kg) Innershield electrode coils to be mounted on 2” (51mm) O.D. spindles. Order K435.

COIL ADAPTER

60 lb. Coil Adapter

Adapts 60 lb. Lincoln coils of electrode to 2” (51mm) spindle. Order K1504-1.

K1504-1

READI-REEL ADAPTERS

30 lb. (14 kg) Readi-Reel Adapter Adapts 22-30 lb. (10-14 kg) Lincoln Readi-Reel coils of electrode to 2” (51mm) spindle. Order K363P.

K363P

60 lb. (27.2 kg) Adapter Adapts 50-60 lb. (22.7-27.2 kg) Lincoln Readi-Reel coils of electrode to 2” (51mm) spindle. Order K438.

K438

Plastic Wire Cover

Protects wire from dust and dirt and provides electrical isolation.

For up to 44 lb. wire packages, Order K1634-1.

For up to 60 lb. wire packages, Order K1634-2.

Water Connection Kit

Includes quick connect fittings on front and back of wire drive for use with water-cooled guns and Magnum Coolers. Kit provides for one gun. Order K590-6.

Swivel Platform

Mounts to the lift bail on the power source and bottom of the Power Feed 10. Wire feeder may be lifted off if needed. Compatible with Light Duty Caster Kit. Includes “lazy susan” parts tray. Order K1557-1. (Power Feed 10 only.)

K1557-1

10