Wireless Projector Server | User Manual |
6.5 Operating Mode
IP Setup
•IP Address: The default value is 192.168.100.10
•Subnet Mask: The default value is 255.255.255.0
•Default Gateway: 192.168.100.10
DHCP Server Setup – Can be Auto or Disabled
•Start IP: The starting IP address of the DHCP Server
•End IP: The ending IP address of the DHCP Server
Wireless Setup – Can be Enabled or Disabled
•Region: Select your region
•SSID: The maximum length is 32 bytes
•SSID Broadcast: Enable or Disable function
•Channel: Fixed or auto channel; Selecting “Auto” means that after powering on the box, it will scan all of wireless channels and select clear one channel automatically. By choosing manual, you can select the channel you want to use
•WEP: Choose to disable WEP key or select one of 64/128bit in ASCII or HEX string
•Key Index: If WEP is enabled, set the key value according to WEP mode selected
GateKeeper
•All Pass / All Block / Internet Only (options)
6.6Projection Setup
11
