Installation Manual | English |
Introduction
Thank you for purchasing the LINDY DVI Switch Remote. This high performance switch allows you to connect multiple DVI/HDMI devices to a single DVI/HDMI equipped TV, projector or TFT monitor.
Installation Manual | English |
Product Information (4 port model shown)
Designed for Home Theatre/Cinema installations, the DVI Switch Remote supports HDCP signals and HDTV resolutions of up to 1080p. VGA analogue sources are also supported, when used with the correct adapters. Please note, however, that there is no signal conversion from analogue to digital or vice versa – this means the monitor has to support and
Display
PC
Set Top Box
DVD Player
Typical DVI Switch Remote application (4 port model)
Package Contents
LINDY 2 or 4 Port DVI Switch Remote
9V DC, 500mA power supply
This manual
Features
Input Ports: 2/4 x |
Output Ports: 1x |
Device Selection: push button or |
4 selectable IR codes to avoid conflicts with other devices |
LED channel display indicates channel selection and IR code |
HDCP support |
Channel Select
Push Button
LED Indicator
Power Supply
Connection
DVI Output port (For connecting to a display/projector)
Channel Select
Buttons
Channel
Up/Down
Buttons
IR Code
Select Buttons
DVI Input ports
(For connecting source devices e.g. DVD player etc.)
Battery
Compartment
Supports HDTV resolutions of up to 1080p (1920 x 1080) | |
When used with computers, supports | |
| @60Hz (TFT) and VGA resolutions of up to 2048 x 1536 |
Squeeze to release
- 2 - | - 3 - |