
User Manual | English |
12.Use the supplied screws to secure both sides of the drive
13.Carefully assemble the top and bottom of the case. If the upper case does not fit properly, adjust the hard disk position and try again
14.Replace the 4 case screws and affix the two foam feet as illustrated
15.Connect the Power Cable to the Mini Enclosure and the mains power supply. Now connect the USB or FireWire cable to the enclosure and to your computer.
Important: You can only make one connection from your computer to the housing via USB or FireWire. You cannot connect to both the USB and FireWire ports on the housing at the same time as this will cause damage to the enclosure.
Note: If you are using the FireWire interface, you can plug the cable into either of the FireWire sockets. The second socket can be used for connecting another FireWire device in series.
Boot up your computer first, and then switch on the drive enclosure to mount the drive.
5