_2000_xp_nt4.0\Sl3114r.inf, click Open then OK.
5.Highlight Silicon Image Sil 3114 SATARaid Controller and click OK. 6.If the Insert Disk dialog appears, click OK then Browse.
7.Highlight Sl3114r.sys and click Open then OK.
Verification of the Proper Installation for Windows NT 4.0
1.Double click My Computer/Control Panel/SCSI Adapters.
2.Highlight Silicon Image Sil 3114 SATARaid Controller and click Properties.
This device is working properly is displayed in the dialog box, the driver has been
correctly installed.
4.4. Windows 2000 Driver Installation
For New Windows 2000 Systems (Fresh Installation)
1. Before installation, copy all the files under directory E:\SATA Raid_4Port\ Sil3114\ Win98_me _2000_xp_nt4.0\driver\ *.* to a blank floppy disk.
2.After the SATA RAID PCI Host Adapter and attached drives are configured, follow Microsoft procedures to install Windows accordingly.
3.At the Windows
4.Insert the Driver diskette. Press S, then press Enter.
5.Select Silicon Image SiI 3114 SATARaid Controller for Windows NT 4.0 and 2000
and press Enter.
6. Press Enter to continue and follow
Add Windows 2000 Driver on Original Booting Device
1.After the SATA RAID PCI Host Adapter and attached drives are configured, boot up Windows.
2.At the Found New Hardware Wizard, click Next.
3.Select Search for a suitable driver for my device (recommended) and click Next.
4.Insert the Driver CD in your
the other boxes, click Next, type in E:\ (If your
5.Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me _2000_xp_nt4.0\Sl3114r.inf, click Open then OK.
6.Click Next if the Digital Signature Not Found message appears, click Yes. (Note If prompted for Windows 2000
OK and Finish. (assuming E: is your
7. Click Finish.
4.5.Windows XP Driver Installation
-9 -
