Lindy Switch manual Network configuration

Network configuration

This page allows you to configure the various aspects of the IP port and its relationship with the local network.

			Network		Config
MAC		Address		00:0F:58:00:00:04
Use		DHCP		No
IP		Address		192.168.42.154
Net		Mask		255.255.255.0
Gateway
VNC		Port		5900
HTTP Port				80
		Clear IP		Access	Control
Save					Cancel

To get here

1Use the local keyboard and log on as the ‘admin’ user.

2Press (hotkeys may be different).

3Select ‘Configuration’.

4Select ‘Network configuration’.



MAC Address

Media Access Control address – this is the unique and unchangeable code that was hard coded within your LINDY KVM IP unit when it was built. It consists of six 2-digit hexadecimal (base 16) numbers separated by colons. A section of the MAC address identifies the manufacturer, while the remainder is effectively the unique electronic serial number of your particular unit.

Use DHCP

DHCP is an acronym for ‘Dynamic Host Configuration Protocol’. Its function is particularly useful when connecting to medium size or larger networks, such as the Internet. When this option is selected, your LINDY KVM IP will attempt to locate a DHCP server on the network. If such a server is located, it will supply three things to the LINDY KVM IP: an IP address, an IP network mask (also known as a Subnet mask) and a Gateway address. These are not usually granted permanently, but on a ‘lease’ basis for a fixed amount of time or for as long as the LINDY KVM IP remains connected and switched on. Discover allocations.

IP Address

This is the identity of the LINDY KVM IP within a network. The IP address can be thought of as the telephone number of the LINDY KVM IP. Unlike the MAC address, the IP address can be altered to suit the network to which it is connected. It can either be entered manually or configured automatically using the DHCP option. When the DHCP option is enabled, this entry is greyed out.

Net Mask

Also often called the ‘subnet-mask’, this value is used alongside the IP address to help define a smaller collection (or subnet) of devices on a network. In this way a distinction is made between locally connected devices and ones that are reachable elsewhere, such as on the wider Internet. This process helps to reduce overall traffic on the network and hence speed up connections in general.

Gateway

This is the address of the device that links the local network (to which the LINDY KVM IP is connected) to another network such as the Internet. Usually this is a network switch or router and it will be used whenever a device to be contacted lies outside the local network.

VNC Port

This is the logical link through which communications with a remote VNC viewer will be channelled (see What is a port?). The default setting is 5900 which is

a widely recognised port number for use by VNC software. However, in certain circumstances it may be advantageous to alter this number - see Security issues with ports for more details.

Note: The VNC port and HTTP port can be set to the same port number in order to simplify router and firewall configuration. If this is done then the LINDY KVM IP will “listen” for both types of traffic on the single port.

HTTP Port

This is the logical link through which communications with a remote web browser will be channelled. The default setting of 80 is an established standard for web (HTTP – HyperText Transfer Protocol) traffic though this can be changed to suit your local network requirements.

Clear IP Access Control

This option removes all entries from the IP access control feature within the LINDY KVM IP. The IP access control feature (configurable by a remote admin user) allows certain network address ranges to be denied access to the LINDY KVM IP. If set incorrectly, it is possible to exclude all network users and so this option provides an emergency recovery point.

  



42