Initial Setup
Search for Bluetooth Devices
The Bluetooth Device Selection window will attempt to search for any Bluetooth devices in the area.
Note: If you wish not to continue
searching now, you may click and go back to Step 6
Figure 3.7 Device Selection
Select Bluetooth Device to configure
If devices have been found, they will be shown as an icon corresponding to the type of device.
If the device you are searching for is not turned on, you may switch the device on and click
The drop down menu will allow you to
reduce the search to a specific group,
unless you are sure of the group your Figure 3.8 Found Devices device is in, (recommended) select Show All Devices.
Select the icon of the device you wish to connect to and click
Note: You can only select one at a time, you will be able to repeat this process later.
Note: A device needs to be selected before Next button can be clicked on.
Initial Setup 017