Key 1 ~ Key 4: Enables user to create an encryption scheme for Wireless LAN transmissions. Manually enter a set of values for each key. Select a key to use by clicking the radio button next to the key. Click “Clear” to erase key values.
WPA/WPA2 Security
If WPA or WPA2 is selected, the below screen is shown. Please set the length of the encryption key and the parameters for the RADIUS server.
Lifetime: Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius server.
Encryption Key: Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to use.
RADIUS Server:
1.Enter the IP address, Port used and Shared Secret by the Primary Radius Server.
2.Enter the IP address, Port used and Shared Secret by the Secondary Radius Server.
WPA-PSK/WPA2-PSK Security
If
Advanced
This screen enables user to configure advanced wireless functions.
Beacon Interval: Type the beacon interval in the text box. User can specify a value from 1 to 1000. The default beacon interval is 100.
RTS Threshold: Type the RTS
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 256 and 2346 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. User can specify a value between 1 and 65535. The default value is 1.
TX Rates (Mbps): Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN.
11g only mode: If selected the Enable, only allow 802.11g WLAN client communicate with this WLAN Router.
Antenna Transmit Power: Adjust the power of the antenna transmission by selecting from the dropping list for full, half
27 |
| 28 |
