Alarm Operation
Setting the Alarm Timer:
1.Press the ALM button and the clock will appear in the display with the Hour number flashing.
2.Rotate the VOLUME knob until the correct Hour appears in the display. “ALARM” will appear in the display indicating the alarm is activated.
Note 1: When setting the alarm clock make sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use 12:00 AM, because that time is used to cancel the alarm.
3.Press the VOLUME knob and the Minute indi- cators will start flashing.
4.Rotate the VOLUME knob until the correct Minutes appears in the display. Wait 5 seconds and the colon between the hours and the min- utes will start flashing. “ALARM” will appear in the display indicating the alarm is set.
5.Press the POWER button to turn the unit off. The unit will automatically turn on when the set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the alarm time to “A AM 12:00”. “ALARM” will dis- appear in the display indicating the alarm has been cancelled.
10
