Sound Controls

Bass, Treble and Balance Control

Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol- lowing order: Bass, Treble, Balance and Volume.

Bass:

Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control.

Treble:

Select the Treble mode by pressing the VOLUME knob. Increase the Treble by rotating the knob clockwise. Decrease the Treble by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control.

Balance:

Select the Balance mode by pressing the VOLUME knob. Adjust the Balance by rotating the knob.

R - L = Equal sound Right and Left R - 7 = Right speaker only

L 7 = Left speaker only

After 6 seconds control reverts back to volume control.

Equalizer (EQ):

Press the EQ button to choose between the preset equalizer settings: Normal, Classic, Rock, Pop and Jazz as indicated in the display area.

Loud:

To boost high and low tones at low volume levels, press and hold the EQ button until “LOUD

ON” appears in the display. To deselect, press

and hold the EQ button again until “LOUD OFF” Hold appears in the display.

7

Page 7
Image 7
Linear RV5080 installation manual Bass, Treble and Balance Control, Equalizer EQ, Loud